Outdoor mm-wave 5G/6G transmission with adaptive analog beamforming and IFoF fronthaul

Adaptive analog beamforming is a key technology to enable spatial control of millimeter-wave wireless signals radiated from phased array antennas (PAAs) which is essential to maximize the capacity of future mobile networks and to ensure efficient usage of scarce spectrum. Intermediate frequency-over-fiber (IFoF), on the other hand, is a promising technology for the millimeter-wave (mm-wave) mobile fronthaul due to its low complexity, high optical spectral efficiency, and low latency. The combination of IFoF and PAA is key to implement mm-wave mobile communications in a scalable, centralized, efficient, and reliable manner. This work presents, for the first time to the best of the authors’ knowledge, an extensive outdoor measurement campaign where an experimental IFoF mm-wave wireless setup is evaluated by using PAAs with adaptive beamforming on the transmitter and receiver sides. The configuration of the experimental setup is according to 5G standards, transmitting signals wirelessly at 27 GHz central frequency in the n258 band. The employed PAAs are composed of 8-by-8 patch antenna arrays, allowing beam steering in the azimuth and elevation angles. Furthermore, different end-user locations, antenna configurations, and wireless scenarios are tested in the outdoor experiment, showing excellent EVM performance and achieving 64-QAM transmission over up to 165.5 m at up to 1.88 Gbit/s. The experimental results enable optimization of the experimental setup for different scenarios and prove the system’s reliability in different wireless conditions. In addition, the results of this work prove the viability and potential of IFoF combined with PAA to be part of the future 5G/6G structure.