A mechanical chest compressor closed-loop controller with an effective trade-off between blood flow improvement and ribs fracture reduction

被引:0
|
作者
Guang Zhang
Taihu Wu
Zhenxing Song
Haitao Wang
Hengzhi Lu
Yalin Wang
Dan Wang
Feng Chen
机构
[1] National Biological Protection Engineering Centre,Institute of Medical Equipment
关键词
Chest compression (CC); Trade-off; Closed-loop controller; Partial pressure of end-tidal CO; (PETCO2); Cardiopulmonary resuscitation (CPR); Chest stiffness;
D O I
暂无
中图分类号
学科分类号
摘要
Chest compression (CC) is a significant emergency medical procedure for maintaining circulation during cardiac arrest. Although CC produces the necessary blood flow for patients with heart arrest, improperly deep CC will contribute significantly to the risk of chest injury. In this paper, an optimal CC closed-loop controller for a mechanical chest compressor (OCC-MCC) was developed to provide an effective trade-off between the benefit of improved blood perfusion and the risk of ribs fracture. The trade-off performance of the OCC-MCC during real automatic mechanical CCs was evaluated by comparing the OCC-MCC and the traditional mechanical CC method (TMCM) with a human circulation hardware model based on hardware simulations. A benefit factor (BF), risk factor (RF) and benefit versus risk index (BRI) were introduced in this paper for the comprehensive evaluation of risk and benefit. The OCC-MCC was developed using the LabVIEW control platform and the mechanical chest compressor (MCC) controller. PID control is also employed by MCC for effective compression depth regulation. In addition, the physiological parameters model for MCC was built based on a digital signal processor for hardware simulations. A comparison between the OCC-MCC and TMCM was then performed based on the simulation test platform which is composed of the MCC, LabVIEW control platform, physiological parameters model for MCC and the manikin. Compared with the TMCM, the OCC-MCC obtained a better trade-off and a higher BRI in seven out of a total of nine cases. With a higher mean value of cardiac output (1.35 L/min) and partial pressure of end-tidal CO2 (15.7 mmHg), the OCC-MCC obtained a larger blood flow and higher BF than TMCM (5.19 vs. 3.41) in six out of a total of nine cases. Although it is relatively difficult to maintain a stable CC depth when the chest is stiff, the OCC-MCC is still superior to the TMCM for performing safe and effective CC during CPR. The OCC-MCC is superior to the TMCM in performing safe and effective CC during CPR and can be incorporated into the current version of mechanical CC devices for high quality CPR, in both in-hospital and out-of-hospital CPR settings.
引用
收藏
页码:487 / 497
页数:10
相关论文
共 4 条
  • [1] A mechanical chest compressor closed-loop controller with an effective trade-off between blood flow improvement and ribs fracture reduction
    Zhang, Guang
    Wu, Taihu
    Song, Zhenxing
    Wang, Haitao
    Lu, Hengzhi
    Wang, Yalin
    Wang, Dan
    Chen, Feng
    [J]. MEDICAL & BIOLOGICAL ENGINEERING & COMPUTING, 2015, 53 (06) : 487 - 497
  • [2] An optimal closed-loop control strategy for mechanical chest compression devices: A trade-off between the risk of chest injury and the benefit of enhanced blood flow
    Zhang, Guang
    Zheng, Jie-Wen
    Wu, Jian
    Wu, Tai-Hu
    [J]. COMPUTER METHODS AND PROGRAMS IN BIOMEDICINE, 2012, 108 (01) : 288 - 298
  • [3] Closed-Loop Control of Complex Networks: A Trade-Off between Time and Energy
    Sun, Yong-Zheng
    Leng, Si-Yang
    Lai, Ying-Cheng
    Grebogi, Celso
    Lin, Wei
    [J]. PHYSICAL REVIEW LETTERS, 2017, 119 (19)
  • [4] Towards Personalized Closed-Loop Mechanical CPR: A Model Relating Carotid Blood Flow to Chest Compression Rate and Duration
    Lampe, Joshua W.
    Padmanaban, Subash
    Becker, Lance B.
    Zanos, Theodoros P.
    [J]. IEEE TRANSACTIONS ON BIOMEDICAL ENGINEERING, 2020, 67 (05) : 1253 - 1262