Optimizing multiple process parameters in fused deposition modeling with particle swarm optimization

被引:2
|
作者
Arup Dey
David Hoffman
Nita Yodo
机构
[1] North Dakota State University,Department of Industrial and Manufacturing Engineering
关键词
Fused deposition modeling; Process parameters; Compressive strength; Build time; Multi-parameters; Particle swarm optimization;
D O I
暂无
中图分类号
学科分类号
摘要
Fused deposition modeling (FDM) is one of the most widely used additive manufacturing processes to produce prototypes as well as functional parts from thermoplastics. However, the applications of the FDM process are still limited due to several drawbacks, such as poor surface quality, poor mechanical properties, or high built time. It has been deemed that the part characteristics and build time can be improved by determining an optimum combination of process parameters. To optimize multiple process parameters in FDM, this paper employs a multi-objective particle swarm optimization based on the data collected from the experimental study. Four (04) process parameters, namely layer thickness, build orientation, infill density, and extrusion temperature are optimized to achieve higher compressive strength and lower build time. The optimization results provide information on the combined impacts of the four process parameters on compressive strength and build time. This information can aid decision makers with better judgment when dealing with multiple conflicting objectives.
引用
收藏
页码:393 / 405
页数:12
相关论文
共 50 条
  • [1] Optimizing multiple process parameters in fused deposition modeling with particle swarm optimization
    Dey, Arup
    Hoffman, David
    Yodo, Nita
    [J]. INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM, 2020, 14 (02): : 393 - 405
  • [2] Optimization of fused deposition modeling (FDM) process parameters for flexural strength
    Dev, Saty
    Srivastava, Rajeev
    [J]. MATERIALS TODAY-PROCEEDINGS, 2021, 44 : 3012 - 3016
  • [3] Optimizing process parameters of fused deposition modeling by Taguchi method for the fabrication of lattice structures
    Dong, Guoying
    Wijaya, Grace
    Tang, Yunlong
    Zhao, Yaoyao Fiona
    [J]. ADDITIVE MANUFACTURING, 2018, 19 : 62 - 72
  • [4] Investigations into Complete Liquefier Dynamics and Optimization of Process Parameters for Fused Deposition Modeling
    Pandey, Ashutosh
    Pradhan, Sharad K.
    [J]. MATERIALS TODAY-PROCEEDINGS, 2018, 5 (05) : 12940 - 12955
  • [5] Topology optimization for fused deposition modeling process
    Rezaie, R.
    Badrossamay, M.
    Ghaie, A.
    Moosavi, H.
    [J]. PROCEEDINGS OF THE SEVENTEENTH CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING (ISEM), 2013, 6 : 521 - 526
  • [6] Particle Swarm Optimization for Calibrating and Optimizing Xinanjiang Model Parameters
    Kuok, Kuok King
    Chan, Chiu Po
    [J]. INTERNATIONAL JOURNAL OF ADVANCED COMPUTER SCIENCE AND APPLICATIONS, 2012, 3 (09) : 115 - 123
  • [7] A framework for optimizing process parameters in fused deposition modeling using predictive modeling coupled response surface methodology
    Deka, Angshuman
    Hall, John F.
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2024, 131 (01): : 447 - 466
  • [8] A framework for optimizing process parameters in fused deposition modeling using predictive modeling coupled response surface methodology
    Angshuman Deka
    John F. Hall
    [J]. The International Journal of Advanced Manufacturing Technology, 2024, 131 : 447 - 466
  • [9] Optimization of fused deposition modeling process parameters: a review of current research and future prospects
    Omar A. Mohamed
    Syed H. Masood
    Jahar L. Bhowmik
    [J]. Advances in Manufacturing, 2015, 3 : 42 - 53
  • [10] Optimization of fused deposition modeling process parameters:a review of current research and future prospects
    Omar A.Mohamed
    Syed H.Masood
    Jahar L.Bhowmik
    [J]. Advances in Manufacturing, 2015, 3 (01) : 42 - 53