Electroplastic cutting influence on power consumption during drilling process

被引：0
|
作者：
Saqib Hameed
Hernán A. González Rojas
Antonio J. Sánchez Egea
Amelia Napoles Alberro
机构：
[1] Universitat Politécnica de Catalunya,Department of Mechanical Engineering (EPSEVG), DEFAM group
[2] Universitat Politécnica de Catalunya,Department of Mechanical Engineering (EUETIB), DEFAM group
来源：
The International Journal of Advanced Manufacturing Technology | 2016年 / 87卷
关键词：
Electropulse; Drilling; Specific cutting energy; Power consumption; Electroplasticity;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The aim of this study is to report the use of non-conventional material removal process technique. It was found that electropulses (EPs) assisted drilling process improves the material machinability based on the eletroplastic influence. The influence of EPs in drilling process is studied by combining different feed rates, drills diameters, and current densities in 7075 aluminium and 1045 carbon steel. The results show that the electrically assisted drilling process improves material machinability, decreases the specific cutting energy up to 27 % in aluminium and 17 % in steel.
引用
收藏
页码：1835 / 1841
页数：6
相关论文
共 50 条
  • [1] Electroplastic cutting influence on power consumption during drilling process
    [J]. González Rojas, Hernán A. (hernan.gonzalez@upc.edu), 1835, Springer London (87): : 5 - 8
  • [2] Electroplastic cutting influence on power consumption during drilling process
    Hameed, Saqib
    Gonzalez Rojas, Hernan A.
    Sanchez Egea, Antonio J.
    Napoles Alberro, Amelia
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016, 87 (5-8): : 1835 - 1841
  • [3] Effect of electroplastic cutting on the manufacturing process and surface properties
    Sanchez Egea, Antonio J.
    Gonzalez Rojas, Hernan A.
    Montilla Montana, Carlos A.
    Kallewaard Echeverri, Valentina
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2015, 222 : 327 - 334
  • [4] INFLUENCE OF A ZIGZAGGING LOCATION OF THE KNIVES IN THE CUTTING UNIT ON THE ENERGY CONSUMPTION DURING THE CUTTING PROCESS OF HORTICULTURAL PRODUCE
    Antonov, Nikolay M.
    Lebed', Nikita I.
    Makarov, Aleksey M.
    [J]. JOURNAL OF FOOD PROCESS ENGINEERING, 2015, 38 (03) : 262 - 270
  • [5] Influence of Cutting Tool and Drilling Process on the Machinability of Inconel 718
    Ma, L. J.
    Yu, H.
    Mao, X. H.
    Li, C. R.
    Feng, C. Y.
    Li, F. N.
    [J]. MANUFACTURING TECHNOLOGY, 2023, 23 (02): : 204 - 215
  • [6] Influence of Orthopaedic Drilling Parameters on Surface Roughness and Cutting Force of Bone Drilling Process
    Izamshah, R.
    Noorazizi, M. S.
    Kasim, M. S.
    Haron, C. H. Che
    [J]. PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON ELECTRONICS, MECHANICS, CULTURE AND MEDICINE, 2016, 45 : 752 - 758
  • [7] In process monitoring of cutting temperature during the drilling of FRP laminate
    Sorrentino, L.
    Turchetta, S.
    Bellini, C.
    [J]. COMPOSITE STRUCTURES, 2017, 168 : 549 - 561
  • [8] POWER CONSUMPTION OF ROCK DECOMPOSITION PROCESS DURING DIAMOND CORE DRILLING USING PULSE FLUSHING
    Kozhevnykov, A.
    Dreus, A.
    [J]. MINING OF MINERAL DEPOSITS, 2018, 12 (03): : 22 - 27
  • [9] Theoretical Study and Experiment Validation on Drilling Cutting Weight during the Whole Process of Drilling
    Wang, Z. H.
    Tan, J.
    Tan, Y. L.
    Wu, Y. H.
    [J]. SHOCK AND VIBRATION, 2021, 2021
  • [10] The influence of different PVD coatings techniques on cutting forces in a drilling process
    Benga, G.
    [J]. PROCEEDINGS OF THE 6TH INTERNATIONAL CONFERENCE OF DAAAM BALTIC INDUSTRIAL ENGINEERING, PTS 1 AND 2, 2008, : 407 - 412
12345