The significance of friction in the single point incremental forming process

被引：0
|
作者：
P. Eyckens
J. Duflou
A. Van Bael
P. Van Houtte
机构：
[1] Katholieke Universiteit Leuven,Department MTM, Faculty of Engineering
[2] Katholieke Universiteit Leuven,Mechanical Engineering Department
[3] KHLim (Limburg Catholic University College),IWT
[4] KULeuven,MTM
来源：
International Journal of Material Forming | 2010年 / 3卷
关键词：
Single Point Incremental Forming; Finite Element Modeling; Friction;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The Single Point Incremental Forming Process (SPIF) makes use of a single, small forming tool to incrementally deform a metal sheet into a complex shape. Without a need for dedicated tooling, this process meets the demand for small batch production and Rapid Prototyping of industrial shell-like structures. The sheet is formed due to a locally applied stress field on its surface, consisting of a normal and a shear component. The shear component is strongly influenced by friction with the dragging forming tool. In common practice, SPIF is performed under well lubricated conditions and with tool rotation, both designed to minimize friction. Through-Thickness Shear (TTS), which is part of the deformation mechanism in SPIF, may be intuitively linked to the friction applied during the process.
引用
收藏
页码：947 / 950
页数：3
相关论文
共 50 条
  • [1] THE SIGNIFICANCE OF FRICTION IN THE SINGLE POINT INCREMENTAL FORMING PROCESS
    Eyckens, P.
    Duflou, J.
    Van Bael, A.
    Van Houtte, P.
    [J]. INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2010, 3 : 947 - 950
  • [2] Influence of forming parameters on friction coefficient in single point incremental forming process
    Yao, Zimeng
    Liang, Xiaoming
    Wu, Shenli
    Liu, Ling
    Bai, Lang
    Zhang, Jialing
    [J]. FERROELECTRICS, 2023, 609 (01) : 20 - 40
  • [3] Forming Parameters on Friction during Single Point Incremental Forming
    Xu, Qing
    Yao, Zimeng
    [J]. ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2022, 2022
  • [4] STUDY ON FORMING BEHAVIOUR OF FRICTION STIR WELDED BLANKS DURING SINGLE POINT INCREMENTAL FORMING (SPIF) PROCESS
    Marathe, Shalin
    Raval, Harit
    [J]. PROCEEDINGS OF THE ASME 2020 15TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE (MSEC2020), VOL 1B, 2020,
  • [5] Process Parameters Optimization in Single Point Incremental Forming
    Gulati V.
    Aryal A.
    Katyal P.
    Goswami A.
    [J]. Journal of The Institution of Engineers (India): Series C, 2016, 97 (2) : 185 - 193
  • [6] Process mechanics analysis in single point incremental forming
    Ambrogio, G
    Filice, L
    Fratini, L
    Micari, F
    [J]. MATERIALS PROCESSING AND DESIGN: MODELING, SIMULATION AND APPLICATIONS, PTS 1 AND 2, 2004, 712 : 922 - 927
  • [7] The effect of process parameters on forming forces in single point incremental forming
    Dwivedy, Maheshwar
    Kalluri, Vinayak
    [J]. 18TH INTERNATIONAL CONFERENCE ON SHEET METAL, SHEMET 2019 - NEW TRENDS AND DEVELOPMENTS IN SHEET METAL PROCESSING, 2019, 29 : 120 - 128
  • [8] Incremental single point forming
    Jeswiet, J.
    Ali, A.
    [J]. American Society of Mechanical Engineers, Manufacturing Engineering Division, MED, 2000, 11 : 509 - 513
  • [9] Single point incremental forming
    Ham, Marnie
    Jeswiet, Jack
    [J]. INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY, 2008, 32 (04): : 374 - 387
  • [10] Incremental single point forming
    Jesvaet, J
    [J]. TRANSACTIONS OF THE NORTH AMERICAN MANUFACTURING RESEARCH INSTITUTION OF SME, VOL XXIX, 2001, 2001, : 75 - 79
12345