Development of atmospheric correction algorithm for Geostationary Ocean Color Imager (GOCI)

This paper describes an atmospheric correction algorithm for Geostationary Ocean Color Imager (GOCI) and its early phase evaluation. This algorithm was implemented in GOCI Data Processing System (GDPS) version 1.1. The algorithm is based on the standard SeaWiFS method, which accounts for multiple scattering effects and partially updated in terms of turbid case-2 water correction, optimized aerosol models, and solar angle correction per slot. For turbid water correction, we used a regional empirical relationship between water reflectance at the red (660 nm) and near infrared bands (745 nm and 865 nm). The relationship was derived from turbid pixels in satellite images after atmospheric correction, and processed using aerosol properties derived for neighboring non-turbid waters. For validation of the GOCI atmospheric correction, we compared our results with in situ measurements of normalized water leaving radiance (nLw) spectra that were obtained during several cruises in 2011 around Korean peninsula. The match up showed an acceptable result with mean ratio of the GOCI to in situnLw(λ), 1.17, 1.24, 1.26, 1.15, 0.86 and 0.99 at 412 nm, 443 nm, 490 nm, 555 nm, 660 nm and 680 nm, respectively. It is speculated that part of the deviation arose from a lack of vicarious calibration and uncertainties in the above water nLw measurements.