Experimental Investigation of Machining AISI 1040 Medium Carbon Steel Under Cryogenic Machining: A Comparison with Dry Machining

被引：31

作者：

Gupta M.K. ^{[1
]}

Singh G. ^{[2
]}

Sood P.K. ^{[1
]}

机构：

[1] National Institute of Technology Hamirpur, Hamirpur, 177005, Himachal Pradesh

[2] Guru Nanak Dev Engineering College, Ludhiana, 141006, Punjab

来源：

Journal of The Institution of Engineers (India): Series C | 2015年 / 96卷 / 4期

关键词：

Cryogenic cooling; Cutting forces; Surface roughness; Tool wear;

D O I：

10.1007/s40032-015-0178-9

中图分类号：

学科分类号：

摘要：

This experimental work was carried out by turning of AISI 1040 medium carbon steel in which the effect of cryogenic cooling (LN2) used as a cutting fluid is compared to that of dry machining with respect to tool wear i.e. crater and flank wear, surface roughness, cutting forces (feed and cutting forces) and cutting temperature. Experiments were performed using uncoated tungsten carbide insert tool having various feed rate and constant cutting speed. Compared to dry machining, in LN2 machining, overall the tool wear were reduced to 55.45 and 65.53 %, surface roughness was reduced to 125.90 % and forces were reduced to 61.94 and 96.60 %. The experimental results proved that the application of cryogenic coolant overall increases the machining performance as compared to dry machining. © 2015, The Institution of Engineers (India).

引用

页码：373 / 379

页数：6

共 50 条

[1] An experimental investigation on effect of minimum quantity lubrication in machining AISI 1040 steel
Dhar, N. R.
Ahmed, M. T.
Islam, S.
[J]. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2007, 47 (05): : 748 - 753
[2] Evaluation of machining performance in cryogenic machining of Inconel 718 and comparison with dry and MQL machining
Yusuf Kaynak
[J]. The International Journal of Advanced Manufacturing Technology, 2014, 72 : 919 - 933
[3] Evaluation of machining performance in cryogenic machining of Inconel 718 and comparison with dry and MQL machining
Kaynak, Yusuf
[J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2014, 72 (5-8): : 919 - 933
[4] Experimental and numerical investigation of dry turning AISI 1030 carbon steel using CNC lathe machining
Alemayoh, Gebremichael Haileselasse
Singh, Balkeshwar
Tesfamariam, Belay Brehane
[J]. ENGINEERING RESEARCH EXPRESS, 2023, 5 (01):
[5] Residual Stresses in Machining of AISI 52100 Steel under Dry and Cryogenic Conditions: A Brief Summary
Caruso, S.
Outeiro, J. C.
Umbrello, D.
Batista, A. C.
[J]. MATERIAL FORMING ESAFORM 2014, 2014, 611-612 : 1236 - 1242
[6] Cryogenic Machining of Hard-to-machine Material, AISI 52100: A Study of Chip Morphology and Comparison with Dry Machining
Huang, Aihua
Kaynak, Yusuf
Umbrello, Domenico
Jawahir, I. S.
[J]. ADVANCES IN MATERIALS PROCESSING X, 2012, 500 : 140 - 145
[7] Experimental Investigation of the Effects of Cutting Tool Coating Materials on Surface Roughness in Machining of AISI 1040 Steel
Habali, Kasim
Gokkaya, Hasan
Sert, Hasan
[J]. JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI, 2006, 9 (01): : 35 - 38
[8] Simultaneous machining and surface alloying of AISI 1040 steel by electrical discharge machining with boron oxide powders
Hacı Bekir Özerkan
[J]. Journal of Mechanical Science and Technology, 2018, 32 : 4357 - 4364
[9] Simultaneous machining and surface alloying of AISI 1040 steel by electrical discharge machining with boron oxide powders
Ozerkan, Haci Bekir
[J]. JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2018, 32 (09) : 4357 - 4364
[10] Numerical analysis and experimental investigation in the machining of AISI 316 steel
Parida, A. K.
Rao, P., V
Ghosh, S.
[J]. SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES, 2019, 45 (01):

← 1 2 3 4 5 →