Evaluation of stress distribution in nickel-titanium rotary instruments with different geometrical designs subjected to bending and torsional load: a finite element study

被引：0
|
作者：
Manar Galal
Tamer M. Hamdy
机构：
[1] National Research Centre (NRC),Researcher, Restorative and Dental Materials Department
来源：
Bulletin of the National Research Centre | / 44卷 / 1期
关键词：
Rotary files; NiTi; Design; Torsion; Bending; Stress distribution; Cross section; Pitch; Taper; Off-center;
D O I：
10.1186/s42269-020-00377-x
中图分类号：
学科分类号：
摘要：
引用
收藏
相关论文
共 46 条
  • [1] A Paradigm Shift for Torsional Stiffness of Nickel-Titanium Rotary Instruments: A Finite Element Analysis
    Zanza, Alessio
    Seracchiani, Marco
    Di Nardo, Dario
    Reda, Rodolfo
    Gambarini, Gianluca
    Testarelli, Luca
    JOURNAL OF ENDODONTICS, 2021, 47 (07) : 1149 - 1156
  • [2] Evaluation of dynamic and static torsional resistances of nickel-titanium rotary instruments
    Abu-Tahun, Ibrahim H.
    Ha, Jung-Hong
    Kwak, Sang Won
    Kim, Hyeon-Cheol
    JOURNAL OF DENTAL SCIENCES, 2018, 13 (03) : 207 - 212
  • [3] Relation between laboratory cantilever bending test and finite element analysis of five different nickel-titanium rotary instruments
    Amira Galal Ismail
    Manar Galal
    Mohamed H. Zaazou
    Tamer M. Hamdy
    Rasha M. Abdelraouf
    Bulletin of the National Research Centre, 44 (1)
  • [4] Influence of phase transformation on the torsional and bending properties of nickel-titanium rotary endodontic instruments
    Miyai, K
    Ebihara, A
    Hayashi, Y
    Doi, H
    Suda, H
    Yoneyama, T
    INTERNATIONAL ENDODONTIC JOURNAL, 2006, 39 (02) : 119 - 126
  • [5] Evaluation of Torsional Resistance and Bending Stiffness of Coronal Flaring Nickel-Titanium Instruments
    Weissheimer, Theodoro
    Alcalde, Murilo Priori
    Cortez, Julia Barrionuevo
    da Rosa, Ricardo Abreu
    Vivan, Rodrigo Ricci
    Souza Calefi, Pedro Henrique
    Hungaro Duarte, Marco Antonio
    Reis So, Marcus Vinicius
    EUROPEAN ENDODONTIC JOURNAL, 2021, 6 (03): : 284 - 289
  • [6] Numeric Evaluation of Innovate Spring Machined Nickel-Titanium Rotary Instruments: A 3-dimensional Finite Element Study
    Kim, Na Yoon
    Kwak, Sang Won
    Yoon, Tae Ho
    Ha, Jung-Hong
    Versluis, Antheunis
    Kim, Hyeon-Cheol
    JOURNAL OF ENDODONTICS, 2021, 47 (02) : 303 - 308
  • [7] Cyclic Fatigue of Different Nickel-Titanium Rotary Instruments: A Comparative Study
    Testarelli, L.
    Grande, N. M.
    Plotino, G.
    Lendini, M.
    Pongione, G.
    De Paolis, G.
    Rizzo, F.
    Milana, V.
    Gambarini, G.
    OPEN DENTISTRY JOURNAL, 2009, 3 : 55 - 58
  • [8] Finite element analysis of rotary nickel-titanium endodontic instruments: A critical review of the methodology
    Chien, Philip Y-H
    Walsh, Laurence J.
    Peters, Ove A.
    EUROPEAN JOURNAL OF ORAL SCIENCES, 2021, 129 (05)
  • [9] Influence of Combined Cyclic Fatigue and Torsional Stress on the Fracture Point of Nickel-Titanium Rotary Instruments
    Setzer, Frank C.
    Boehme, Christian P.
    JOURNAL OF ENDODONTICS, 2013, 39 (01) : 133 - 137
  • [10] Dynamic cyclic and torsional fatigue resistance of TruNatomy compared with different nickel-titanium rotary instruments
    Elnaghy, Amr M.
    Elsaka, Shaymaa E.
    Elshazli, Alaa H.
    AUSTRALIAN ENDODONTIC JOURNAL, 2020, 46 (02) : 226 - 233
12345