Optimization of cutting parameters for turning Al-SiC(10p) MMC using ANOVA and grey relational analysis

被引：0
|
作者：
Radhakrishnan Ramanujam
Nambi Muthukrishnan
Ramasamy Raju
机构：
[1] Sri Venkateswara College of Engineering,Department of Mechanical Engineering
[2] Anna University,Department of Industrial Engineering
来源：
International Journal of Precision Engineering and Manufacturing | 2011年 / 12卷
关键词：
Metal matrix composites; Machining; PCD; Surface Roughness; Specific power; Grey relational analysis;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
This paper presents the detailed experimental investigation on turning Aluminium Silicon Carbide particulate Metal Matrix Composite (Al-SiC -MMC) using polycrystalline diamond (PCD) 1600 grade insert. Experiments were carried out on medium duty lathe. A plan of experiments, based on the techniques of Taguchi, was performed. Analysis of variance (ANOVA) is used to investigate the machining characteristics of MMC (A356/10/SiCP). The objective was to establish a correlation between cutting speed, feed and depth of cut to the specific power and surface finish on the work piece. The optimum machining parameters were obtained by Grey relational analysis. Finally, confirmation test was performed to make a comparison between the experimental results and developed model and also tool wear analysis is studied.
引用
收藏
页码：651 / 656
页数：5
相关论文
共 50 条
  • [1] Optimization of Cutting Parameters for Turning Al-SiC(10p) MMC Using ANOVA and Grey Relational Analysis
    Ramanujam, Radhakrishnan
    Muthukrishnan, Nambi
    Raju, Ramasamy
    [J]. INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2011, 12 (04) : 651 - 656
  • [2] Optimization of Machining Parameters for Drilling Al-SiC MMC Using ANOVA and Grey Relational Analysis
    Dhavamani, C.
    Alwarsamy, T.
    [J]. DYNAMICS OF MACHINES AND MECHANISMS, INDUSTRIAL RESEARCH, 2014, 592-594 : 610 - +
  • [3] MODELING MACHINABILITY PARAMETERS OF TURNING AL-SIC(10P) MMC BY ARTIFICIAL NEURAL NETWORK
    Muthukrishnan, N.
    Mohan, Ravi
    Thiagarajan, M. S.
    Venugopal, J.
    [J]. MSEC 2008: PROCEEDINGS OF THE ASME INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE 2008, VOL 1, 2009, : 67 - 72
  • [4] Machinability issues in turning of Al-SiC (10p) metal matrix composites
    Muthukrishnan, N.
    Murugan, M.
    Rao, K. Prahlada
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2008, 39 (3-4): : 211 - 218
  • [5] Machinability issues in turning of Al-SiC (10p) metal matrix composites
    N. Muthukrishnan
    M. Murugan
    K. Prahlada Rao
    [J]. The International Journal of Advanced Manufacturing Technology, 2008, 39 : 211 - 218
  • [6] Optimization of machining parameters of Al/SiC-MMC with ANOVA and ANN analysis
    Muthukrishnan, N.
    Davim, J. Paulo
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2009, 209 (01) : 225 - 232
  • [7] MACHINABILITY STUDIES AND ARTIFICIAL NEURAL NETWORK MODELING OF TURNING Al-SiC(10P) METAL MATRIX COMPOSITES
    Muthukrishnan, N.
    [J]. IMECE 2008: PROCESSING AND ENGINEERING APPLICATIONS OF NOVEL MATERIALS, VOL 15, 2008, : 151 - 159
  • [8] Machining Parameter Optimization of Al/SiC/Gr Hybrid Metal Matrix Composites using ANOVA and Grey Relational Analysis
    Elango, Mallichetty
    Annamalai, Krishnamoorthy
    [J]. FME TRANSACTIONS, 2020, 48 (01): : 173 - 179
  • [9] Optimization of Drilling Process on Al-SiC Composite using Grey Relation Analysis
    Babu, K. Vinoth
    Uthayakumar, M.
    Jappes, J. T. Winowlin
    Rajan, T. P. D.
    [J]. INTERNATIONAL JOURNAL OF MANUFACTURING MATERIALS AND MECHANICAL ENGINEERING, 2015, 5 (04) : 17 - 31
  • [10] Multi Response Optimization of Process Parameters Using Grey Relational Analysis for Turning of Al-6061
    Deepak, Doreswamy
    Beedu, Rajendra
    [J]. INTERNATIONAL CONFERENCE ON MATERIALS, ALLOYS AND EXPERIMENTAL MECHANICS (ICMAEM-2017), 2017, 225
12345