The Influence of the Cooling Rate during Quenching and Preheating Temperature on the Toughness of a Hot-work Tool Steel

被引：0
|
作者：
Jesperson, Henrik [1 ]
Nilsson, Cherin [1 ]
机构：
[1] Department of Material Science, Uddeholms AB, Hagfors,683 85, Sweden
来源：
BHM Berg- und Huttenmannische Monatshefte | 2012年 / 157卷 / 11期
关键词：
Hot-work tool steel; Toughness; Gross cracking; Heat treatment; Preheating; Warmarbeitsstahl; Zähigkeit; Spannungsrissbildung; Wärmebehandlung; Vorwärmung;
D O I：
10.1007/s00501-012-0040-9
中图分类号：
学科分类号：
摘要：
5
引用
收藏
页码：401 / 405
页数：4
相关论文
共 50 条
  • [1] Influence of the Cooling Rate on the Mechanical Properties of a Hot-work Tool Steel
    Mayer, S.
    Scheu, C.
    Leitner, H.
    Clemens, H.
    Siller, I.
    [J]. BHM Berg- und Huttenmannische Monatshefte, 2007, 152 (05): : 132 - 136
  • [2] TRANSFORMATIONS DURING QUENCHING AND TEMPERING OF HOT-WORK TOOL STEEL
    Bala, Piotr
    Krawczyk, Janusz
    [J]. METAL 2009, CONFERENCE PROCEEDINGS, 2009, : 64 - 71
  • [3] Optimizing Hot-Work Tool Steel Microstructure for Enhanced Toughness
    Bajzelj, Anze
    Balasko, Tilen
    Batic, Barbara Setina
    Burja, Jaka
    [J]. CRYSTALS, 2024, 14 (01)
  • [4] NONDESTRUCTIVE EVALUATION OF COOLING RATE AND TOUGHNESS IN HOT-WORK TOOL STEEL QUENCHED FROM VARIOUS AUSTENITIZATION TEMPERATURE BY BARKHAUSEN NOISE-ANALYSIS
    NAKAI, N
    OBATA, M
    [J]. TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1991, 77 (01): : 147 - 154
  • [5] Comparison of the Influence of Cooling Medium on Stress State during Superficial Hardening for the Hot-Work Tool Steel
    Bokota, A.
    Kulawik, A.
    Wrobel, J.
    [J]. ACTA PHYSICA POLONICA A, 2020, 138 (02) : 174 - 177
  • [6] Direct or indirect: Influence of type of retained austenite decomposition during tempering on the toughness of a hot-work tool steel
    Lerchbacher, Christoph
    Zinner, Silvia
    Leitner, Harald
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 564 : 163 - 168
  • [7] Microstructure and Origin of Hot-Work Tool Steel Fracture Toughness Deviation
    Bojan Podgornik
    Vojteh Leskovšek
    [J]. Metallurgical and Materials Transactions A, 2013, 44 : 5694 - 5702
  • [8] Microstructure and Origin of Hot-Work Tool Steel Fracture Toughness Deviation
    Podgornik, Bojan
    Leskovsek, Vojteh
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2013, 44A (13): : 5694 - 5702
  • [9] THE INFLUENCE OF GRAIN-SIZE UPON THE FRACTURE-TOUGHNESS OF THE HOT-WORK TOOL STEEL
    PACYNA, J
    MAZUR, A
    [J]. SCANDINAVIAN JOURNAL OF METALLURGY, 1983, 12 (01) : 22 - 28
  • [10] The effects of annealing temperature and cooling rate on carbide precipitation behavior in H13 hot-work tool steel
    Kang, Minwoo
    Park, Gyujin
    Jung, Jae-Gil
    Kim, Byung-Hoon
    Lee, Young-Kook
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 627 : 359 - 366
12345