Effect of modification and ceramic particles on solidification behavior of aluminum-matrix composites

被引：0
|
作者：
Shusen Wu
Ya You
Ping An
T. Kanno
H. Nakae
机构：
[1] Huazhong University of Science and Technology,State Key Lab of Dies Technology
[2] Kimura Foundry Co.,Department of Materials Science and Engineering
[3] Ltd.,undefined
[4] Shizuoka,undefined
[5] Waseda University,undefined
来源：
Journal of Materials Science | 2002年 / 37卷
关键词：
Cooling Curve; Microstructure Analysis; Ceramic Particle; Solidification Behavior; Eutectic Silicon;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Thermal analysis is used to establish the relationship between solidification history and the microstructure of SiC particulate reinforced Al-Si alloy-matrix composites. The results show that cooling curves are influenced by the presence of SiC particles and by strontium modification. The eutectic growth temperature of SiCP/359 composites modified with Sr lies in the range of 840 to 843 K, i.e., about 5 to 7 K higher than that of Sr-modified unreinforced 359. For the same composite, the eutectic undercooling is higher with Sr modification than without. The eutectic solidification time of the composites is shorter than that of the unreinforced base alloy because of the presence of the ceramic particles. Strontium modification has the tendency to extend the eutectic solidification time. Microstructure analysis reveals that Sr modification has a refining effect on eutectic silicon for the composites, and SiC particles in the composite melt serve as the substrates for eutectic Si phase nucleation.
引用
收藏
页码：1855 / 1860
页数：5
相关论文
共 50 条
  • [1] Effect of modification and ceramic particles on solidification behavior of aluminum-matrix composites
    Wu, SS
    You, Y
    An, P
    Kanno, T
    Nakae, H
    [J]. JOURNAL OF MATERIALS SCIENCE, 2002, 37 (09) : 1855 - 1860
  • [2] CORROSION BEHAVIOR OF ALUMINUM-MATRIX COMPOSITES
    ROPER, GW
    ATTWOOD, PA
    [J]. JOURNAL OF MATERIALS SCIENCE, 1995, 30 (04) : 898 - 903
  • [3] MELTING BEHAVIOR OF CADMIUM PARTICLES EMBEDDED IN AN ALUMINUM-MATRIX
    ZHANG, DL
    HUTCHINSON, JL
    CANTOR, B
    [J]. JOURNAL OF MATERIALS SCIENCE, 1994, 29 (08) : 2147 - 2151
  • [4] THE INFLUENCE OF SOLIDIFICATION RATE ON STRUCTURE PARAMETERS OF ALUMINUM-MATRIX PARTICULATE COMPOSITES
    MOLDOVAN, P
    ALEXANDRU, C
    PANAIT, N
    POPESCU, G
    CONDEIU, D
    BALESCU, C
    GHICA, GV
    [J]. JOURNAL DE PHYSIQUE IV, 1993, 3 (C7): : 1811 - 1816
  • [5] RHEOLOGICAL BEHAVIOR OF PARTIALLY SOLIDIFIED ALUMINUM-MATRIX COMPOSITES
    QUAAK, CJ
    HORSTEN, MG
    KOOL, WH
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1994, 183 (1-2): : 247 - 256
  • [6] Tribological behavior of aluminum-matrix composites reinforced with carbon nanostructures
    Evdokimov I.A.
    Chernyshova T.A.
    Pivovarov G.I.
    Bykov P.A.
    Ivanov L.A.
    Vaganov V.E.
    [J]. Evdokimov, I.A. (ivan_911@mail.ru), 1600, Maik Nauka Publishing / Springer SBM (05): : 255 - 262
  • [7] Effect of Geometrical Characteristic on the Mechanical Behavior of SiC Particle Reinforced Aluminum-Matrix Composites
    Xu Zunping
    Cheng Nanpu
    Qiang Hua
    Chen Zhiqian
    [J]. RARE METAL MATERIALS AND ENGINEERING, 2009, 38 (11) : 1974 - 1977
  • [8] Functionally graded aluminum-matrix composites
    Kevorkijan, V
    [J]. AMERICAN CERAMIC SOCIETY BULLETIN, 2003, 82 (02): : 60 - 64A
  • [9] PROPERTIES OF SEMISOLID ALUMINUM-MATRIX COMPOSITES
    QUAAK, CJ
    KOOL, WH
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1994, 188 (1-2): : 277 - 282
  • [10] Behavior of ceramic particles at solid/liquid interface during solidification of metal matrix composites
    Nakae, H
    Wu, S
    [J]. CMMC 96 - PROCEEDINGS OF THE FIRST INTERNATIONAL CONFERENCE ON CERAMIC AND METAL MATRIX COMPOSITES, PTS 1 AND 2, 1997, 127-3 : 503 - 509
12345