Regional Ambient Noise Tomography in the Eastern Alps of Europe

We present results from ambient noise tomography applied to temporary seismological stations in the easternmost part of the Alps and their transition to the adjacent tectonic provinces (Vienna Basin, Bohemian Massif, Southern Alps, Dinarides). By turning each station into a virtual source, we recover surface waves in the frequency range between 0.1 and 0.6 Hz, which are sensitive to depths of approximately 2–15 km. The utilization of horizontal components allows for the analysis of both Rayleigh and Love waves with comparable signal-to-noise ratio. Measured group wave dispersion curves between stations are mapped to local cells by means of a simultaneous inverse reconstruction technique. The spatial reconstruction for Love-wave velocities fails in the central part of the investigated area, and we speculate that a heterogeneous noise source distribution is the cause for the failure. Otherwise, the obtained group velocity maps correlate well with surface geology. Inversion of Rayleigh-wave velocities for shear-wave velocities along a vertical N-S section stretching from the Bohemian Massif through the Central Alps to the Southern Alps and Dinarides reveals a mid-crustal low-velocity anomaly at the contact between the Bohemian Massif and the Alps, which shows a spatial correlation with the P-wave velocity structure and the low-frequency component of the magnetic anomaly map. Our study is validated by the analysis of resolution and accuracy, and we further compare the result to shear-wave velocity models estimated from other active and passive experiments in the area.