Mechanical properties of PLA-based composites for fused deposition modeling technology

被引：0
|
作者：
S. M. Lebedev
O. S. Gefle
E. T. Amitov
D. V. Zhuravlev
D. Y. Berchuk
E. A. Mikutskiy
机构：
[1] National Research Tomsk Polytechnic University,
来源：
The International Journal of Advanced Manufacturing Technology | 2018年 / 97卷
关键词：
Composite polymer materials; Poly(lactic acid); Mechanical properties; Fused deposition modeling;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
To predict the mechanical behavior of 3D printed products, it is important to understand the composite material properties and the effect that parameters of 3D printing process have on the properties of these materials. The mechanical properties of PLA-based composite materials were studied in this work. The mechanical properties of the hot pressed samples were compared to those of the 3D printed samples. The elongation at break and the yield strength of the samples fabricated by 3D printing are decreased by 15–60% compared to those for the hot pressed samples. It has been found that the mechanical properties of 3D printed samples do not practically depending on the deposition scheme.
引用
收藏
页码：511 / 518
页数：7
相关论文
共 50 条
  • [1] Mechanical properties of PLA-based composites for fused deposition modeling technology
    Lebedev, S. M.
    Gefle, O. S.
    Amitov, E. T.
    Zhuravlev, D. V.
    Berchuk, D. Y.
    Mikutskiy, E. A.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 97 (1-4): : 511 - 518
  • [2] Enhanced mechanical properties of CNT/Graphene reinforced PLA-based composites fabricated via fused deposition modelling
    Kumar, G. S. Pradeep
    Keshavamurthy, R.
    Panigrahi, Sajna P.
    Thomas, Shijo
    Hebbar, Gurumoorthy S.
    Prasad, C. Durga
    Aden, Adem Abdirkadir
    RESULTS IN ENGINEERING, 2025, 25
  • [3] Electromagnetic and mechanical properties of carbonyl iron powders-PLA composites fabricated by fused deposition modeling
    Guan, Xiao-Na
    Xu, Xiang-Nan
    Kuniyoshi, Ryosuke
    Zhou, Hui-Hua
    Zhu, Yue-Feng
    MATERIALS RESEARCH EXPRESS, 2018, 5 (11):
  • [4] Orthotropic mechanical properties of PLA materials fabricated by fused deposition modeling
    Li, Meiyu
    Xu, Yanan
    Fang, Jianguang
    THIN-WALLED STRUCTURES, 2024, 199
  • [5] Effect of Mechanical Recycling on the Mechanical Properties of PLA-Based Natural Fiber-Reinforced Composites
    Finnerty, James
    Rowe, Steven
    Howard, Trevor
    Connolly, Shane
    Doran, Christopher
    Devine, Declan M.
    Gately, Noel M.
    Chyzna, Vlasta
    Portela, Alex
    Bezerra, Gilberto Silva Nunes
    McDonald, Paul
    Colbert, Declan Mary
    JOURNAL OF COMPOSITES SCIENCE, 2023, 7 (04):
  • [6] MECHANICAL PROPERTIES AND FAILURE ANALYSIS OF PLA/COPPER COMPOSITES FABRICATED BY FUSED DEPOSITION MODELLING
    Kumar, R. V.
    Kumar, K. R.
    Soms, N.
    JOURNAL OF MINING AND METALLURGY SECTION B-METALLURGY, 2024, 60 (01) : 33 - 44
  • [7] Mechanical Properties of Polylactic Acid/Chitosan Composites by Fused Deposition Modeling
    Bera, Tanusree
    Vincent, Sumi
    Mohanty, Smita
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2024,
  • [8] The Effect of High-Pressure Hydrostatic Extrusion on Mechanical Properties of Printed with Fused Deposition Modeling PLA and PLA-Diatomaceous Earth Composites
    Dubicki, Adrian
    Kulczyk, Mariusz
    Szlazak, Karol
    Lojkowski, Maciej
    Kurzydlowski, Krzysztof Jan
    MATERIALS, 2025, 18 (03)
  • [9] Mechanical and Geometric Performance of PLA-Based Polymer Composites Processed by the Fused Filament Fabrication Additive Manufacturing Technique
    Maria Reverte, Jose
    Angel Caminero, Miguel
    Miguel Chacon, Jesus
    Garcia-Plaza, Eustaquio
    Jose Nunez, Pedro
    Becar, Jean Paul
    MATERIALS, 2020, 13 (08)
  • [10] Mechanical properties of CF-reinforced PLA parts manufactured by fused deposition modeling
    El Magri, Anouar
    El Mabrouk, Khalil
    Vaudreuil, Sebastien
    Touhami, Mohamed Ebn
    JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS, 2021, 34 (05) : 581 - 595
12345