A study of abrasive waterjet cutting of alumina ceramics with controlled nozzle oscillation

被引：0

作者：

S. Xu

J. Wang

机构：

[1] Queensland University of Technology,School of Engineering Systems

[2] The University of New South Wales,School of Mechanical and Manufacturing Engineering

来源：

The International Journal of Advanced Manufacturing Technology | 2006年 / 27卷

关键词：

Abrasive waterjet cutting; Cutting performance; Modelling; Nozzle oscillation ;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

This paper presents and discusses an experimental investigation of abrasive waterjet (AWJ) cutting of alumina ceramics with controlled nozzle oscillation. Particular attention is paid to the effect of small oscillation angles on the various cutting performance measures. It is found that nozzle oscillation at small angles can equally improve the major cutting performance measures, if the cutting parameters are correctly selected. However, under high water pressures, high nozzle traverse speeds and large oscillation frequencies, nozzle oscillation may cause a decrease in some major cutting performance measures, such as surface finish. Plausible trends of cutting performance with respect to the process parameters are further considered. Finally, a predictive mathematical model for the depth of cut is developed and verified.

引用

页码：693 / 702

页数：9

共 50 条

[1] A study of abrasive waterjet cutting of alumina ceramics with controlled nozzle oscillation
Xu, S
Wang, J
[J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2006, 27 (7-8): : 693 - 702
[2] Depth of cut models for multipass abrasive waterjet cutting of alumina ceramics with nozzle oscillation
Wang J.
[J]. Frontiers of Mechanical Engineering in China, 2010, 5 (1): : 19 - 32
[3] ENHANCING THE DEPTH OF CUT IN ABRASIVE WATERJET CUTTING OF ALUMINA CERAMICS BY USING MULTIPASS CUTTING WITH NOZZLE OSCILLATION
Wang, J.
Zhong, Y.
[J]. MACHINING SCIENCE AND TECHNOLOGY, 2009, 13 (01) : 76 - 91
[4] A focused review on enhancing the abrasive waterjet cutting performance by using controlled nozzle oscillation
School of Mechanical and Manufacturing Engineering, University of New South Wales, Sydney, NSW 2052, Australia
[J]. Key Eng Mat, 2009, (33-44): : 33 - 44
[5] Enhancing abrasive waterjet cutting of ceramics by head oscillation techniques
Queensland Univ of Technology, Brisbane
[J]. CIRP Ann Manuf Technol, 1 (327-330):
[6] A study on nozzle wear modeling in Abrasive Waterjet Cutting
Vu Ngoc Pi
Nguyen Quoc Tuan
[J]. ADVANCES IN ABRASIVE TECHNOLOGY XII, 2009, 76-78 : 345 - 350
[7] Depth of cut models for multipass abrasive waterjet cutting of alumina ceramics
Fan J.
[J]. International Journal of Abrasive Technology, 2010, 3 (03) : 238 - 258
[8] Processing of alumina ceramics by abrasive waterjet - an experimental study
Saurabh, Saket
Tiwari, Tanmay
Nag, Akash
Dixit, A. R.
Mandal, Niladri
Das, A. K.
Mandal, Amitava
Srivastava, Ashish Kumar
[J]. MATERIALS TODAY-PROCEEDINGS, 2018, 5 (09) : 18061 - 18069
[9] Predictive depth of jet penetration models for abrasive waterjet cutting of alumina ceramics
Wang, J.
[J]. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2007, 49 (03) : 306 - 316
[10] Profile cutting on alumina ceramics by abrasive waterjet. Part 2: cutting performance models
Wang, J.
Liu, H.
[J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2006, 220 (05) : 715 - 725

← 1 2 3 4 5 →