The Effectiveness of Film Cooling of a Flat Surface in an Accelerated Flow with Air Injection Through Fan-Shaped Holes

被引：0
|
作者：
E. Yu. Marchukov
A. V. Starodumov
A. V. Il’inkov
A. V. Shchukin
A. M. Ermakov
V. V. Takmovtsev
I. A. Popov
机构：
[1] Lyulka Experimental Design Bureau,
[2] Tupolev Kazan National Research Technical University,undefined
来源：
Thermal Engineering | 2022年 / 69卷
关键词：
physical experiment; surface film cooling; hole belt; cylindrical and fan-shaped holes; blowing ration; injection angle; flow acceleration;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
引用
收藏
页码：293 / 301
页数：8
相关论文
共 50 条
  • [1] The Effectiveness of Film Cooling of a Flat Surface in an Accelerated Flow with Air Injection Through Fan-Shaped Holes
    Marchukov, E. Yu.
    Starodumov, A. V.
    Il'inkov, A. V.
    Shchukin, A. V.
    Ermakov, A. M.
    Takmovtsev, V. V.
    Popov, I. A.
    [J]. THERMAL ENGINEERING, 2022, 69 (04) : 293 - 301
  • [2] Investigation of film cooling effectiveness for double fan-shaped holes
    School of Power and Energy, Northwestern Polytechnical University, Xi'an 710072, China
    [J]. Hangkong Dongli Xuebao, 2008, 11 (2082-2087):
  • [3] Research on the Hole Length Ratio of Fan-Shaped Holes in Flat Plate Film Cooling
    Zhou, Xun
    Qin, Runxuan
    Cai, Le
    [J]. FRONTIERS IN ENERGY RESEARCH, 2021, 9
  • [4] Large eddy simulation on effects of trench geometry on film cooling effectiveness through fan-shaped holes
    Zamiri, Ali
    Abdeh, Hamed
    Barigozzi, Giovanna
    Chung, Jin Taek
    [J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2023, 216
  • [5] Endwall film cooling through fan-shaped holes with different area ratios
    Barigozzi, Giovanna
    Franchini, Giuseppe
    Perdichizzi, Antonio
    [J]. Proceedings of the ASME Turbo Expo 2006, Vol 3, Pts A and B: HEAT TRANSFER: GENERAL INTEREST, 2006, : 599 - 609
  • [6] Film cooling of a contoured endwall nozzle vane through fan-shaped holes
    Barigozzi, Giovanna
    Franchini, Giuseppe
    Perdichizzi, Antonio
    Ravelli, Silvia
    [J]. INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, 2010, 31 (04) : 576 - 585
  • [7] FILM COOLING EFFECTIVENESS MEASUREMENT OF FAN-SHAPED HOLES MANUFACTURED USING EDM TECHNIQUE
    Rouina, S.
    Abdeh, H.
    Barigozzi, G.
    Odemondo, V.
    Abba, L.
    Iannone, M.
    [J]. PROCEEDINGS OF ASME TURBO EXPO 2021: TURBOMACHINERY TECHNICAL CONFERENCE AND EXPOSITION, VOL 5A, 2021,
  • [8] Study on Additive Effect of Film Cooling Effectiveness in Two Rows of Fan-Shaped Holes
    Li, Chen
    An, Baitao
    Liu, Jianjun
    [J]. JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 2024, 146 (02):
  • [9] Surface roughness effects on film-cooling effectiveness in a fan-shaped cooling hole
    Zamiri, Ali
    You, Sung Jin
    Chung, Jin Taek
    [J]. AEROSPACE SCIENCE AND TECHNOLOGY, 2021, 119
  • [10] Numerical Simulation of Backward Film Cooling with Fan-Shaped Holes
    Subbuswanny, Ganesh
    Li, Xianchang
    Gharat, Kunal
    [J]. PROCEEDINGS OF THE ASME SUMMER HEAT TRANSFER CONFERENCE - 2013, VOL 4, 2014,
12345