Static Properties of Plain Journal Bearing

被引：0
|
作者：
A. Kalina
A. Mazurkow
M. Oleksy
B. Wierzba
机构：
[1] Rzeszów University of Technology,
来源：
International Applied Mechanics | 2022年 / 58卷
关键词：
bearing system; Hertz model; radial slide bearing; deformation;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The phenomenon of occurrence of a hydrodynamic oil film on the bearing system is analyzed. A theoretical model of the radial slide bearing system that takes into account the normal and static stresses as well as the deformations is proposed. The values of stress and deformation in the contact area are established. They are compared with the values obtained using the Hertz model. Moreover, the results of the analysis of the bearing system in thermodynamic equilibrium are presented. In this case, the journal and the bushing are separated by an oil layer.
引用
收藏
页码：227 / 235
页数：8
相关论文
共 50 条
  • [1] Static Properties of Plain Journal Bearing
    Kalina, A.
    Mazurkow, A.
    Oleksy, M.
    Wierzba, B.
    INTERNATIONAL APPLIED MECHANICS, 2022, 58 (02) : 227 - 235
  • [2] THERMOHYDRODYNAMIC PERFORMANCE OF A PLAIN JOURNAL BEARING
    RAJALINGHAM, C
    PRABHU, BS
    ASLE TRANSACTIONS, 1987, 30 (03): : 368 - 372
  • [3] EFFECTS OF JOURNAL LOBING ON PERFORMANCE OF A HYDRODYNAMIC PLAIN JOURNAL BEARING
    RADFORD, A
    FITZGEORGE, D
    WEAR, 1977, 45 (03) : 311 - 322
  • [4] Finite length plain journal bearing theory
    Capone, G.
    D'Agostino, V.
    Guida, D.
    Journal of Tribology, 1994, 116 (03) : 648 - 653
  • [5] Performance of a plain journal bearing with flooded ends
    Talmage, G
    Carpino, M
    TRIBOLOGY TRANSACTIONS, 2002, 45 (03) : 310 - 317
  • [6] Thermohydrodynamic analysis of a worn plain journal bearing
    Fillon, M
    Bouyer, J
    TRIBOLOGY INTERNATIONAL, 2004, 37 (02) : 129 - 136
  • [7] A FINITE-LENGTH PLAIN JOURNAL BEARING THEORY
    CAPONE, G
    DAGOSTINO, V
    GUIDA, D
    JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 1994, 116 (03): : 648 - 653
  • [8] Study of thermal boundary conditions for a plain journal bearing
    Banwait, SS
    Chandrawat, HN
    TRIBOLOGY INTERNATIONAL, 1998, 31 (06) : 289 - 296
  • [9] Improvement of the THD performance of a misaligned plain journal bearing
    Bouyer, J
    Fillon, M
    JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 2003, 125 (02): : 334 - 342
  • [10] Analysis of an aerodynamic grooved journal bearing with plain sleeve
    Wang, CC
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2006, 220 (01) : 51 - 60
12345