Investigation of high-temperature plastic deformation using instrumented microindentation tests. Part IThe deformation of three aluminum alloys at 473 K to 833 K

Constant-load indentation tests were performed on wrought-2024, P/M-2024, and wrought-1100 aluminum alloys to assess the capability of the microindentation testing technique for measuring the high-temperature deformation rate controlling parameters of these alloys. The three alloys all display threshold indentation stress σth below which the indentation strain rate εind approaches zero. The nominal inter-obstacle spacing, ℓ*, calculated from σth, increases with temperature in a way that is consistent with the known temperature dependence of the inter-particle spacing and dislocation cell size. The measured activation energy ΔGo of ɛind increases with temperature but remains within the range that is typical of deformation that occurs by dislocation glide limited by weak particles or dislocation/dislocation interactions. The three alloys tested show different trends of ΔGo versus ℓ* and the trends are consistent with the known temperature dependence of the obstacles to dislocation glide.