Effects of martensite morphology and tempering on dynamic deformation behavior of dual-phase steels

被引:0
|
作者
Han Sang Lee
Byoungchul Hwang
Sunghak Lee
Chang Gil Lee
Sung-Joon Kim
机构
[1] Pohang University of Science and Technology,the Center for Advanced Aerospace Materials
[2] Pohang University of Science and Technology,the Center for Advanced Aerospace Materials
[3] Pohang University of Science and Technology,the Materials Science and Engineering Department
[4] Korea Institute of Machinery and Materials,the Materials Processing Department
关键词
Ferrite; Martensite; Material Transaction; Carbon Diffusion; Adiabatic Shear Band;
D O I
暂无
中图分类号
学科分类号
摘要
The effects of martensite morphology and tempering on the quasistatic and dynamic deformation behavior of dual-phase steels were investigated in this study. Dynamic torsional tests were conducted on six steel specimens, which had different martensite morphologies and tempering conditions, using a torsional Kolsky bar, and then the test data were compared via microstructures, tensile properties, and fracture mode. Bulky martensites were mixed with ferrites in the step-quenched (SQ) specimens, but small martensites were well distributed in the ferrite matrix in the intermediate-annealed (IA) specimens. Under a dynamic loading condition, the fracture mode of the SQ specimens was changed from cleavage to ductile fracture as the tempering temperature increased, whereas the IA specimens showed a ductile fracture mode, irrespective of tempering. These phenomena were analyzed in terms of a rule of mixtures applied to composites, microstructural variation, martensite softening and carbon diffusion due to tempering, and adiabatic shear-band formation.
引用
收藏
页码:2371 / 2382
页数:11
相关论文
共 50 条
  • [1] Effects of martensite morphology and tempering on dynamic deformation behavior of dual-phase steels
    Lee, HS
    Hwang, B
    Lee, S
    Lee, CG
    Kim, SJ
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2004, 35A (08): : 2371 - 2382
  • [2] Tempering of Martensite in Dual-Phase Steels and Its Effects on Softening Behavior
    Baltazar Hernandez, V. H.
    Nayak, S. S.
    Zhou, Y.
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2011, 42A (10): : 3115 - 3129
  • [3] Tempering of Martensite in Dual-Phase Steels and Its Effects on Softening Behavior
    V. H. Baltazar Hernandez
    S. S. Nayak
    Y. Zhou
    [J]. Metallurgical and Materials Transactions A, 2011, 42 : 3115 - 3129
  • [5] Effects of martensite morphology and volume fraction on quasi-static and dynamic deformation behavior of dual-phase steels
    Sangho Kim
    Sunghak Lee
    [J]. Metallurgical and Materials Transactions A, 2000, 31 : 1753 - 1760
  • [6] Effects of martensite morphology and volume fraction on quasi-static and dynamic deformation behavior of dual-phase steels
    Kim, S
    Lee, S
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2000, 31 (07): : 1753 - 1760
  • [7] Effect of Tempering Conditions on Inhomogeneous Deformation Behavior of Ferrite-Martensite Dual-Phase Steels
    Minami, Hidekazu
    Nakayama, Kyouhei
    Morikawa, Tatsuya
    Higashida, Kenji
    Toji, Yuki
    Hasegawa, Kohei
    [J]. TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 2011, 97 (09): : 493 - 500
  • [8] Effects of martensite morphology on dynamic torsional behavior in dual phase steels
    Kim, KJ
    Lee, CG
    Lee, S
    [J]. SCRIPTA MATERIALIA, 1997, 38 (01) : 27 - 32
  • [9] TEMPERING OF DUAL-PHASE STEELS
    DAVIES, RG
    [J]. JOURNAL OF METALS, 1980, 32 (12): : 45 - 45
  • [10] THE EFFECTS OF PHASE MORPHOLOGY ON THE FATIGUE BEHAVIOR OF DUAL-PHASE STEELS
    RAMAGE, RM
    SHIFLET, GJ
    JATA, KV
    STARKE, EA
    [J]. JOURNAL OF METALS, 1985, 37 (08): : A30 - A30