Effect of Ultrasonic Vibration Treatment on Microstructure, Tensile Properties, Hardness and Wear Behaviour of Brass Alloy

被引:0
|
作者
M. E. Moussa
M. Amin
Khaled M. Ibrahim
机构
[1] Central Metallurgical R&D Institute (CMRDI),Casting Technology Department, Manufacturing Technology Institute
[2] Higher Technological Institute 10th of Ramadan City (HTI),Mechanical Engineering Department
来源
关键词
casting; brass alloy; ultrasonic vibration; microstructure; grain refinement; wear;
D O I
暂无
中图分类号
学科分类号
摘要
Effect of ultrasonic vibration (USV) treatment on microstructure and mechanical properties of brass alloy has been investigated. Microstructure of the investigated brass alloy without USV treatment exhibited stretched and dendritic α-phase within an average length of 165 µm and also interdendritic coarse β-phase. By applying USV treatment, the α-phase is significantly refined that obtained an average length of 21 µm. In addition, USV treatment achieved more homogenized structure of α and β-phases. The refinement of microstructure enhanced of course the mechanical properties of the brass alloy including yield strength, ultimate tensile strength, elongation, hardness and wear resistance. Furthermore, fracture surfaces and worn surfaces mechanisms were also discussed.
引用
收藏
页码:305 / 313
页数:8
相关论文
共 50 条
  • [1] Effect of Ultrasonic Vibration Treatment on Microstructure, Tensile Properties, Hardness and Wear Behaviour of Brass Alloy
    Moussa, M. E.
    Amin, M.
    Ibrahim, Khaled M.
    INTERNATIONAL JOURNAL OF METALCASTING, 2023, 17 (01) : 305 - 313
  • [2] Effect of high-intensity ultrasonic treatment on microstructure, hardness and wear behaviour of the hypereutectic Mg-5Si alloy
    Moussa, M. E.
    Waly, M. A.
    El-Sheikh, A. M.
    INTERNATIONAL SYMPOSIUM ON LIQUID METAL PROCESSING & CASTING 2015 (LMPC2015), 2016, 143
  • [3] Effect of thermal aging on microstructure, hardness, tensile and impact properties of Alloy 617
    Singh, Aditya Narayan
    Moitra, A.
    Bhaskar, Pragna
    Sasikala, G.
    Dasgupta, Arup
    Bhaduri, A. K.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 710 : 47 - 56
  • [4] Effect of ultrasonic vibration on microstructure and tensile properties of aluminum bronze alloy produced by wire arc additive manufacturing
    Chen W.
    Chen Y.-H.
    Wen T.-T.
    Min W.-F.
    Zhang T.-M.
    Feng X.-S.
    Chen, Yu-Hua (ch.yu.hu@163.com), 1600, Central South University of Technology (30): : 2280 - 2294
  • [5] An investigation of microstructure, hardness, tensile behaviour of a titanium alloy: Role of orientation
    Kuruvilla, Mithun
    Srivatsan, T. S.
    Petraroli, M.
    Park, Lisa
    SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES, 2008, 33 (03): : 235 - 250
  • [6] An investigation of microstructure, hardness, tensile behaviour of a titanium alloy: Role of orientation
    Mithun Kuruvilla
    T. S. Srivatsan
    M. Petraroli
    Lisa Park
    Sadhana, 2008, 33 : 235 - 250
  • [7] Effect of ultrasonic vibration treatment on microstructure and dry sliding wear characteristics of LM25 aluminum alloy
    Wagmare, Rajkumar
    Anilkumar, T.
    Prasanna, N. D.
    MATERIALS TODAY-PROCEEDINGS, 2022, 62 : 5671 - 5676
  • [8] The Effect of Ultrasonic Treatment on the Brass Properties
    Volokitina, I. E.
    Naizabekov, A. B.
    Lezhnev, S. N.
    Panin, E. A.
    METALLOPHYSICS AND ADVANCED TECHNOLOGIES, 2025, 47 (02)
  • [9] Effect of ultrasonic vibration and solution heat treatment on microstructures and tensile properties of AZ91 alloy
    Nie, K. B.
    Wang, X. J.
    Wu, K.
    Zheng, M. Y.
    Hu, X. S.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (25-26): : 7484 - 7487
  • [10] Effect of annealing treatment on the microstructures, mechanical, and wear properties of a manganese brass alloy
    Hang Li
    Jinchuan Jie
    Quanye Zhang
    Tingju Li
    Journal of Materials Research, 2016, 31 : 1491 - 1500