Sorption-luminescence determination of gold, silver, and platinum with the use of silica gel chemically modified with N-(1,3,4-thiodiazole-2-thiol)-N′-propylurea groups

Silica gel chemically modified with N-(1,3,4-thiodiazole-2-thiol)-N′-propylurea extracted gold(III) from solutions in the range of 6 M HCl-pH 8 and silver(I) from nitric acid solutions in the range of 6 M HNO3-pH 8 and 1–2 M HCl at 20°C with 99.0–99.9% recovery and a sorption equilibration time of 5 min. Platinum(II) was quantitatively extracted at room temperature from solutions in the range of 4 M HCl-pH 8; the sorption equilibration time was 20 min. For the quantitative extraction of platinum(IV), it should be reduced to platinum(II). The intense yellowish orange luminescence (λmax (Au) = 575 nm, λmax (Ag) = 550 nm, and λmax(Pt) = 620 nm) of surface complexes at 77 K under UV irradiation was used in the development of procedures for the low-temperature sorption-luminescence determination of gold, silver, and platinum. The detection limits were 0.15 (Au), 0.1 (Ag), and 0.05 μg (Pt) per 0.1 g sorbent. The calibration function was linear to 50 (Au, Ag) or 80 μg (Pt) per 0.1 g sorbent. The relative standard deviation in the determination of more than 5 μg of a metal was no higher than 6%. The sorption-luminescence determination procedures were tested in the determination of gold in gold-containing concentrates and their processing products and platinum in alumina-platinum catalysts.