Displacement-Based Design of RC Frames Using Design Spectra of Indian Code and Its Seismic Performance Evaluation

被引:3
|
作者
Qammer S.S. [1 ]
Dalal S.P. [2 ]
Dalal P. [3 ]
机构
[1] Civil Engineering Department, Al Beroni University, Kohistan
[2] Civil Engineering Department, SVIT, Vasad, Dist. Anand, 388306, Gujarat
[3] Faculty of Technology, Dharmsinh Desai University, Nadiad
关键词
Design spectra; Direct displacement-based design; Ductility factor; Performance-based plastic design; Seismic performance;
D O I
10.1007/s40030-019-00373-z
中图分类号
学科分类号
摘要
A set of 4-, 8-, 12-, and 15-storied reinforced concrete moment resisting frames were analysed and designed by direct displacement-based design method and performance-based plastic design method. The design spectra of Indian Standard IS 1893:2016 have been used for the calculation of base shear after its proper synchronization with respect to both the methods. The seismic performance evaluation was done by nonlinear static pushover analysis, and the parameters of comparison were (a) pushover curves, (b) storey drifts and (c) response reduction factor. Results show satisfactory performance of both the methods in terms of capacity and deformation. The response reduction factor values obtained for both approaches are greater than the IS 1893:2016-specified value which indicate the enhanced ductility for both methods. © 2019, The Institution of Engineers (India).
引用
收藏
页码:367 / 379
页数:12
相关论文
共 50 条
  • [1] Direct displacement-based seismic design of buckling-restrained braced RC frames
    Sina Farahani
    Amir H. Akhaveissy
    [J]. Bulletin of Earthquake Engineering, 2022, 20 : 1767 - 1839
  • [2] Inelastic spectra for displacement-based seismic design
    Borzi, B
    Calvi, GM
    Elnashai, AS
    Faccioli, E
    Bommer, JJ
    [J]. SOIL DYNAMICS AND EARTHQUAKE ENGINEERING, 2001, 21 (01) : 47 - 61
  • [3] Direct displacement-based seismic design of buckling-restrained braced RC frames
    Farahani, Sina
    Akhaveissy, Amir H.
    [J]. BULLETIN OF EARTHQUAKE ENGINEERING, 2022, 20 (03) : 1767 - 1839
  • [4] Introduction to a Model Code for Displacement-Based Seismic Design
    Sullivan, Timothy
    Priestley, Nigel
    Calvi, Gian Michele
    [J]. ADVANCES IN PERFORMANCE-BASED EARTHQUAKE ENGINEERING, 2010, 13 : 137 - +
  • [5] Analysis and evaluation of seismic performance of bridges using displacement-based design methods
    Soares, R. W.
    Lima, S. S.
    Santos, S. H. C.
    [J]. MAINTENANCE, MONITORING, SAFETY, RISK AND RESILIENCE OF BRIDGES AND BRIDGE NETWORKS, 2016, : 430 - 430
  • [6] Displacement-based seismic design of SDOF concentrically braced frames
    Goggins, J.
    Sullivan, T.
    [J]. STESSA 2009 - BEHAVIOUR OF STEEL STRUCTURES IN SEISMIC AREAS, 2009, : 685 - 691
  • [7] Seismic Design of Steel Frames by Improved Direct Displacement-Based Design Method
    Kalapodis, Nicos A.
    Muho, Edmond, V
    Beskos, Dimitri E.
    [J]. PROCEEDINGS OF THE 10TH INTERNATIONAL CONFERENCE ON BEHAVIOUR OF STEEL STRUCTURES IN SEISMIC AREAS, STESSA 2022, 2022, 262 : 1072 - 1080
  • [8] Yield displacement-based seismic design of RC wall buildings
    Tjhin, Tjen N.
    Aschheim, Mark A.
    Wallace, John W.
    [J]. ENGINEERING STRUCTURES, 2007, 29 (11) : 2946 - 2959
  • [9] DISPLACEMENT-BASED DESIGN OF RC BRIDGE COLUMNS IN SEISMIC REGIONS
    KOWALSKY, MJ
    PRIESTLEY, MJN
    MACRAE, GA
    [J]. EARTHQUAKE ENGINEERING & STRUCTURAL DYNAMICS, 1995, 24 (12): : 1623 - 1643
  • [10] Displacement-based seismic design method of RC bridge piers
    Wang, Dongsheng
    Li, Hongnan
    Zhao, Yinghua
    Wang, Guoxin
    [J]. Tumu Gongcheng Xuebao/China Civil Engineering Journal, 2006, 39 (10): : 80 - 86