Reductive recovery of manganese from low-grade manganese dioxide ore using toxic nitrocellulose acid wastewater as reductant

被引:0
|
作者
Yong-tao Zhang
Zhi-gang Dan
Ning Duan
Bao-ping Xin
机构
[1] Yan’an University,School of Petroleum and Environment Engineering
[2] Beijing Institute of Technology,School of Materials Science & Engineering
[3] Chinese Research Academy of Environmental Sciences,Technology Center for Heavy Metal Cleaner Production Engineering
关键词
low-grade manganese dioxide ore; nitrocellulose acid wastewater; sulfuric acid leaching; Mn reductive dissolution; electrolytic manganese metal;
D O I
暂无
中图分类号
学科分类号
摘要
The hydrometallurgical strategy of extracting Mn from low-grade Mn ores has attracted attention for the production of electrolytic manganese metal (EMM). In this work, the reductive dissolution of low-grade MnO2 ores using toxic nitrocellulose acidic wastewater (NAW) as a reductant was investigated for the first time. Under the optimized conditions of an MnO2 ore dosage of 100 g·L−1, an ore particle size of −200 mesh, concentrated H2SO4-to-NAW volume ratio of 0.12, reaction temperature of 90°C, stirring speed at 160 r·min−1, and a contact time of 120 min, the reductive leaching efficiency of Mn and the total organic carbon (TOC) removal efficiency of NAW reached 97.4% and 98.5%, respectively. The residual TOC of 31.6 mg·L−1 did not adversely affect the preparation of EMM. The current process offers a feasible route for the concurrent realization of the reductive leaching of Mn and the treatment of toxic wastewater via a simple one-step process.
引用
收藏
页码:990 / 999
页数:9
相关论文
共 50 条
  • [1] Reductive recovery of manganese from low-grade manganese dioxide ore using toxic nitrocellulose acid wastewater as reductant
    Zhang, Yong-tao
    Dan, Zhi-gang
    Duan, Ning
    Xin, Bao-ping
    INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2018, 25 (09) : 990 - 999
  • [2] Reductive recovery of manganese from low-grade manganese dioxide ore using toxic nitrocellulose acid wastewater as reductant
    Yong-tao Zhang
    Zhi-gang Dan
    Ning Duan
    Bao-ping Xin
    InternationalJournalofMineralsMetallurgyandMaterials, 2018, 25 (09) : 990 - 999
  • [3] Selective-Reductive Leaching of Manganese from Low-Grade Manganese Ore Using Tannic Acid as Reductant
    Prasetyo, Erik
    Purwaningsih, Eti
    Astuti, Widi
    MINING METALLURGY & EXPLORATION, 2019, 36 (05) : 1003 - 1012
  • [4] Selective-Reductive Leaching of Manganese from Low-Grade Manganese Ore Using Tannic Acid as Reductant
    Erik Prasetyo
    Eti Purwaningsih
    Widi Astuti
    Mining, Metallurgy & Exploration, 2019, 36 (5) : 1003 - 1012
  • [5] Reductive leaching of manganese from low-grade manganese dioxide ores using corncob as reductant in sulfuric acid solution
    Tian, Xike
    Wen, Xiaoxia
    Yang, Chao
    Liang, Yujun
    Pi, Zhengbang
    Wang, Yanxin
    HYDROMETALLURGY, 2010, 100 (3-4) : 157 - 160
  • [6] Leaching of manganese from low-grade manganese ore using oxalic acid as reductant in sulphuric acid solution
    Sahoo, RN
    Naik, PK
    Das, SC
    HYDROMETALLURGY, 2001, 62 (03) : 157 - 163
  • [7] The recovery of manganese from a low-grade ore
    Weber, HC
    Davenport, CH
    TRANSACTIONS OF THE AMERICAN INSTITUTE OF CHEMICAL ENGINEERS, 1943, 39 : 0585 - 0604
  • [8] Reductive leaching of manganese from low-grade pyrolusite ore in sulfuric acid using pyrolysis-pretreated sawdust as a reductant
    Ya-li Feng
    Shi-yuan Zhang
    Hao-ran Li
    International Journal of Minerals Metallurgy and Materials, 2016, 23 (03) : 241 - 246
  • [9] Reductive leaching of manganese from low-grade pyrolusite ore in sulfuric acid using pyrolysis-pretreated sawdust as a reductant
    Ya-li Feng
    Shi-yuan Zhang
    Hao-ran Li
    International Journal of Minerals, Metallurgy, and Materials, 2016, 23 : 241 - 246
  • [10] Reductive leaching of manganese from low-grade pyrolusite ore in sulfuric acid using pyrolysis-pretreated sawdust as a reductant
    Feng, Ya-li
    Zhang, Shi-yuan
    Li, Hao-ran
    INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2016, 23 (03) : 241 - 246