Effects of cutting conditions on the milling process of titanium alloy Ti6Al4V

被引：0
|
作者：
Hongbing Wu
Shaojian Zhang
机构：
[1] Zhejiang University,College of Mechanical and Energy Engineering, Ningbo Institute of Technology
[2] Zhejiang Provincial Key Lab of Part Rolling Technology,Research Institute of Mechanical Manufacturing Engineering, School of Mechatronics Engineering
[3] Nanchang University,undefined
来源：
The International Journal of Advanced Manufacturing Technology | 2015年 / 77卷
关键词：
Titanium alloy; Milling force; Cutting temperature; Up-milling; Down-milling;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Titanium alloy is a difficult-to-cut material, widely used due to its excellent material and mechanical properties. In this paper, the cutting mechanisms of titanium alloy Ti6Al4V under up-milling and down-milling with different cutting conditions have been theoretically and experimentally discussed. The milling processes were simulated by an orthogonal cutting finite element model. And a series of milling experiments were carried out to verify the simulated results. Significantly, it elaborates the prominent differences of cutting mechanisms of titanium alloy between up-milling and down-milling.
引用
收藏
页码：2235 / 2240
页数：5
相关论文
共 50 条
  • [1] Effects of cutting conditions on the milling process of titanium alloy Ti6Al4V
    Wu, Hongbing
    Zhang, Shaojian
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2015, 77 (9-12): : 2235 - 2240
  • [2] Predictive modelling of cutting forces in end milling of titanium alloy Ti6Al4V
    Chen, Yun
    Li, Huaizhong
    Wang, Jun
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2018, 232 (09) : 1523 - 1534
  • [3] Modelling and Optimization of the Cutting Parameters for the Milling Operation of Titanium Alloy (Ti6Al4V)
    Ilesanmi, Daniyan
    Thlabadira, Isaac
    Phokobye, Solomon
    Mrausi, Siviwe
    Mpofu, Khumbulani
    Masu, Leonard
    [J]. PROCEEDINGS OF 2020 IEEE 11TH INTERNATIONAL CONFERENCE ON MECHANICAL AND INTELLIGENT MANUFACTURING TECHNOLOGIES (ICMIMT 2020), 2020, : 68 - 72
  • [4] Effects of cutting parameters on tool insert wear in end milling of titanium alloy Ti6Al4V
    Luo Ming
    Wang Jing
    Wu Baohai
    Zhang Dinghua
    [J]. CHINESE JOURNAL OF MECHANICAL ENGINEERING, 2017, 30 (01) : 53 - 59
  • [5] Effects of cutting parameters on tool insert wear in end milling of titanium alloy Ti6Al4V
    Ming Luo
    Jing Wang
    Baohai Wu
    Dinghua Zhang
    [J]. Chinese Journal of Mechanical Engineering, 2017, 30 : 53 - 59
  • [6] Influence of average cutting thickness on high performance milling of titanium alloy Ti6Al4V
    Shen, Z.
    Liu, G.
    Chen, M.
    [J]. CURRENT DEVELOPMENT IN ABRASIVE TECHNOLOGY, PROCEEDINGS, 2006, : 470 - +
  • [7] Wear Properties of Titanium and Ti6Al4V Titanium Alloy by Mechanical Milling
    Ozyurek, Dursun
    Tekeli, Suleyman
    [J]. HIGH TEMPERATURE MATERIALS AND PROCESSES, 2011, 30 (1-2) : 175 - 180
  • [8] Influence of Milling on the Fatigue Lifetime of a Ti6Al4V Titanium Alloy
    Moussaoui, Kamel
    Mousseigne, Michel
    Senatore, Johanna
    Chieragatti, Remy
    Lamesle, Pascal
    [J]. METALS, 2015, 5 (03): : 1148 - 1162
  • [9] Effects of Cutting Parameters on the Surface Roughness of Ti6Al4V Titanium Alloys in Side Milling
    Liu, Hao
    Wu, Chonghu
    Chen, Rongde
    [J]. APPLICATION OF DIAMOND AND RELATED MATERIALS, 2011, 175 : 289 - 293
  • [10] The prediction of cutting force in end milling titanium alloy (Ti6Al4V) with polycrystalline diamond tools
    Pan, Wencheng
    Ding, Songlin
    Mo, John
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2017, 231 (01) : 3 - 14
12345