Liquid-Phase Method for the Arrangement of the Components of Aluminum-Matrix Precipitation-Hardened Composite Materials

被引：0
|
作者：
Yu. A. Kurganova
Yu. A. Goncharova
机构：
[1] Bauman Moscow State Technical University (National Research University),
[2] Federal Scientific Agroengineering Center VIM,undefined
来源：
Russian Metallurgy (Metally) | 2022年 / 2022卷
关键词：
: aluminum; silicon carbide; composite material; mechanical mixing; hardness;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Abstract—A composite material with an aluminum-matrix filled with the silicon carbide is studied. A method for liquid-phase arrangement of the components of the composite material is developed and implemented. The concentration of carbide silicon particles introduced into an aluminum matrix is 1%. Experimental samples are used to estimate the changes in the structure and properties. The introduction of 1% silicon carbide into aluminum is found to increase the hardness by to 4.5% of the initial value. An analysis of the structure allows us to state the suitability of the samples and to consider the suggested method as a procedure promising for arrangement of the selected composite material components.
引用
收藏
页码：1750 / 1754
页数：4
相关论文
共 50 条
  • [1] Liquid-Phase Method for the Arrangement of the Components of Aluminum-Matrix Precipitation-Hardened Composite Materials
    Kurganova, Yu. A.
    Goncharova, Yu. A.
    [J]. RUSSIAN METALLURGY, 2022, 2022 (13): : 1750 - 1754
  • [2] Formation of Structure and Properties of Aluminum-Matrix Precipitation-Hardened Structural Materials Fabricated by Liquid-Phase Method
    Sorokina, S. A.
    Kulagina, M. P.
    [J]. METAL SCIENCE AND HEAT TREATMENT, 2020, 61 (11-12) : 745 - 749
  • [3] Formation of Structure and Properties of Aluminum-Matrix Precipitation-Hardened Structural Materials Fabricated by Liquid-Phase Method
    S. A. Sorokina
    M. P. Kulagina
    [J]. Metal Science and Heat Treatment, 2020, 61 : 745 - 749
  • [4] Service properties of aluminum-matrix precipitation-hardened composite materials and the prospects of their use on the modern structural material market
    Kurganova Y.A.
    Chernyshova T.A.
    Kobeleva L.I.
    Kurganov S.V.
    [J]. Russian Metallurgy (Metally), 2011, 2011 (7) : 663 - 666
  • [5] Aluminum-matrix composite materials with shungite rock fillers
    Kalashnikov I.E.
    Kovalevski V.V.
    Chernyshova T.A.
    Bolotova L.K.
    [J]. Russian Metallurgy (Metally), 2010, 2010 (11) : 1063 - 1071
  • [6] Aluminum-Matrix Electrotechnical Composite Alloys Hardened by Endogenous Nano- and Microphases
    Babkin, V. G.
    Terent'ev, N. A.
    Cherepanov, A. I.
    [J]. RUSSIAN METALLURGY, 2014, (09): : 756 - 761
  • [7] Nanostructuring of dispersion-reinforced aluminum-matrix composite materials
    Chernyshova T.A.
    Kobeleva L.I.
    Bykov P.A.
    Bolotova L.K.
    Kalashnikov I.E.
    Volochko A.T.
    Yu Izobello A.
    [J]. Inorganic Materials: Applied Research, 2013, 4 (3) : 247 - 255
  • [8] Modification of Cast Aluminum-Matrix Composite Materials by Refractory Nanoparticles
    Chernyshova, T. A.
    Kobeleva, L. I.
    Kalashnikov, I. E.
    Bolotova, L. K.
    [J]. RUSSIAN METALLURGY, 2009, (01): : 70 - 76
  • [9] Study of the Specifics of Liquid-Phase Oxidation of Aluminum Melt to Obtain an Aluminum Matrix Composite
    A. D. Romanov
    E. A. Romanova
    E. A. Chernyshov
    [J]. Metallurgist, 2021, 65 : 775 - 782
  • [10] Study of the Specifics of Liquid-Phase Oxidation of Aluminum Melt to Obtain an Aluminum Matrix Composite
    Romanov, A. D.
    Romanova, E. A.
    Chernyshov, E. A.
    [J]. METALLURGIST, 2021, 65 (7-8) : 775 - 782
12345