Controlled nanodot fabrication by rippling polycarbonate surface using an AFM diamond tip

被引：0
|
作者：
Yongda Yan
Yang Sun
Jiran Li
Zhenjiang Hu
Xuesen Zhao
机构：
[1] Harbin Institute of Technology,The State Key Laboratory of Robotics and Systems, Robotics Institute
[2] Harbin Institute of Technology,Center for Precision Engineering
[3] Harbin Institute of Technology,undefined
来源：
Nanoscale Research Letters | / 9卷
关键词：
Atomic force microscope (AFM); Polycarbonate (PC); Scratching; Ripples;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The single scratching test of polymer polycarbonate (PC) sample surface using an atomic force microscope (AFM) diamond tip for fabricating ripple patterns has been studied with the focus on the evaluation of the effect of the tip scratching angle on the pattern formation. The experimental results indicated that the different oriented ripples can be easily machined by controlling the scratching angles of the AFM. And, the effects of the normal load and the feed on the ripples formation and their periods were also studied. Based on the ripple pattern formation, we firstly proposed a two-step scratching method to fabricate controllable and oriented complex three-dimensional (3D) nanodot arrays. These typical ripple formations can be described via a stick-slip and crack formation process.
引用
收藏
相关论文
共 50 条
  • [1] Controlled nanodot fabrication by rippling polycarbonate surface using an AFM diamond tip
    Yan, Yongda
    Sun, Yang
    Li, Jiran
    Hu, Zhenjiang
    Zhao, Xuesen
    NANOSCALE RESEARCH LETTERS, 2014, 9 : 1 - 7
  • [2] INTERPRETATION OF AFM IMAGES - THE GRAPHITE SURFACE WITH A DIAMOND TIP
    TANG, H
    JOACHIM, C
    DEVILLERS, J
    SURFACE SCIENCE, 1993, 291 (03) : 439 - 450
  • [3] Research on micro machining using AFM diamond tip
    Sun, T
    Yan, YD
    Xia, JF
    Dong, S
    Liang, YC
    Cheng, K
    ADVANCES IN GRINDING AND ABRASIVE PROCESSES, 2004, 259-2 : 577 - 581
  • [4] Fabrication and Characterization of AFM Probe Integrated with High-Aspect-Ratio Diamond Tip
    Shibata, Takayuki
    Maruno, Kazuhiro
    Nagai, Moeto
    Kawashima, Takahiro
    Mineta, Takashi
    Makino, Eiji
    EMERGING TECHNOLOGY IN PRECISION ENGINEERING XIV, 2012, 523-524 : 569 - +
  • [5] Mechanism of Material Removal in Nanomachining of Fused Quartz using AFM Diamond Tip
    Ichida, Yoshio
    Yamaguchi, Takashi
    Sasanuma, Makoto
    JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING, 2010, 4 (05): : 1015 - 1021
  • [6] Single apex plowing at polymer surfaces using a nanoindenter diamond AFM tip
    Setz, SM
    Duran, RS
    Fagerburg, DR
    Germinario, LT
    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 1998, 216 : U142 - U142
  • [7] Characterisation of surface texture using AFM with trimmed probe tip
    Ali, M. Y.
    Lim, B. H.
    SURFACE ENGINEERING, 2006, 22 (06) : 443 - 446
  • [8] Novel method for site-controlled surface nanodot fabrication by ion beam synthesis
    Buckmaster, R
    Hanada, T
    Kawazoe, Y
    Cho, MW
    Yao, TF
    Urushihara, N
    Yamamoto, A
    NANO LETTERS, 2005, 5 (04) : 771 - 776
  • [9] Fabrication of diamond single-hole transistors using AFM anodization process
    Banno, T
    Tachiki, M
    Seo, H
    Umezawa, H
    Kawarada, H
    DIAMOND AND RELATED MATERIALS, 2002, 11 (3-6) : 387 - 391
  • [10] Fabrication of millimeter scale nanochannels using the AFM tip-based nanomachining method
    Geng, Y. Q.
    Yan, Y. D.
    Zhao, X. S.
    Hu, Z. J.
    Liang, Y. C.
    Sun, T.
    Dong, S.
    APPLIED SURFACE SCIENCE, 2013, 266 : 386 - 394
12345