Using a Patient-Specific 3D-Printed Surgical Guide for High Tibial Osteotomy: A Technical Note

被引：0
|
作者：
Jiang X. [1 ,2 ]
Xie K. [1 ]
Li B. [2 ]
Hu X. [2 ]
Wu H. [1 ]
Gao L. [2 ]
Wang L. [1 ]
Yan M. [1 ]
机构：
[1] Shanghai Key Laboratory of Orthopaedic Implants, Department of Orthopaedic Surgery, Shanghai Ninth People’s Hospital, Shanghai Jiao Tong University School of Medicine, Shanghai
[2] Department of Orthopaedic Surgery, Sun Yat-Sen Memorial Hospital, Sun Yat-Sen University, Guangzhou
来源：
Journal of Shanghai Jiaotong University (Science) | 2021年 / 26卷 / 3期
基金：
中国国家自然科学基金;
关键词：
3D printing; A; high tibial osteotomy (HTO); patient-specific instrumentation (PSI); R; 684; wedge augment;
D O I：
10.1007/s12204-021-2302-8
中图分类号：
学科分类号：
摘要：
Patient-specific instrumentation (PSI) enables a more accurate alignment of the lower limbs in a high tibial osteotomy (HTO) than in traditional surgery; however, the current design of commercial PSIs is not perfect. Therefore, we designed a new patient-specific surgical guide to improve the accuracy of the osteotomy and verified its reliability through a clinical operation. Here, we describe a patient with isolated medial-compartment bilateral knee osteoarthritis, accompanied by a varus deformity of the proximal tibia. The patient was treated with HTO using a patient-specific 3D-printed surgical guide. We concluded that the patient-specific 3D-printed surgical guide improved the accuracy of the osteotomy and the alignment of the lower limb. © 2021, Shanghai Jiao Tong University and Springer-Verlag GmbH Germany, part of Springer Nature.
引用
收藏
页码：339 / 345
页数：6
相关论文
共 50 条
  • [1] Using a Patient-Specific 3D-Printed Surgical Guide for High Tibial Osteotomy: A Technical Note
    Jiang, Xu
    Xie, Kai
    Li, Bo
    Hu, Xumin
    Wu, Haishan
    Gao, Liangbin
    Wang, Liao
    Yan, Mengning
    [J]. Journal of Shanghai Jiaotong University (Science), 2021, 26 (03) : 339 - 345
  • [2] The validity and accuracy of 3D-printed patient-specific instruments for high tibial osteotomy: a cadaveric study
    Zhuang Miao
    Songlin Li
    Desu Luo
    Qunshan Lu
    Peilai Liu
    [J]. Journal of Orthopaedic Surgery and Research, 17
  • [3] The validity and accuracy of 3D-printed patient-specific instruments for high tibial osteotomy: a cadaveric study
    Miao, Zhuang
    Li, Songlin
    Luo, Desu
    Lu, Qunshan
    Liu, Peilai
    [J]. JOURNAL OF ORTHOPAEDIC SURGERY AND RESEARCH, 2022, 17 (01)
  • [4] Corrective limb osteotomy using patient specific 3D-printed guides: A technical note
    Hoekstra, H.
    Rosseels, W.
    Sermon, A.
    Nijs, S.
    [J]. INJURY-INTERNATIONAL JOURNAL OF THE CARE OF THE INJURED, 2016, 47 (10): : 2375 - 2380
  • [5] Clinical Experience Using a 3D-Printed Patient-Specific Instrument for Medial Opening Wedge High Tibial Osteotomy
    Yang, Jesse Chieh-Szu
    Chen, Cheng-Fong
    Luo, Chu-An
    Chang, Ming-Chau
    Lee, Oscar K.
    Huang, Ye
    Lin, Shang-Chih
    [J]. BIOMED RESEARCH INTERNATIONAL, 2018, 2018
  • [6] Patient-specific high tibial osteotomy for varus malalignment: 3D-printed plating technique and review of the literature
    Jeong, Stacy H.
    Samuel, Linsen T.
    Acuna, Alexander J.
    Kamath, Atul F.
    [J]. EUROPEAN JOURNAL OF ORTHOPAEDIC SURGERY AND TRAUMATOLOGY, 2022, 32 (05): : 845 - 855
  • [7] Patient-specific high tibial osteotomy for varus malalignment: 3D-printed plating technique and review of the literature
    Stacy H. Jeong
    Linsen T. Samuel
    Alexander J. Acuña
    Atul F. Kamath
    [J]. European Journal of Orthopaedic Surgery & Traumatology, 2022, 32 : 845 - 855
  • [8] Clinical Utility of a 3D-Printed Patient-Specific Surgical Guide for Partial Nephrectomy
    Lim, Bumjin
    Lee, Sangwook
    Kim, Taehun
    Ock, Junhyeok
    Song, Cheryn
    Kim, Namkug
    Kyung, Yoon Soo
    [J]. UROLOGIA INTERNATIONALIS, 2023, 107 (06) : 591 - 594
  • [9] Use of 3D-Printed Patient-Specific Guide for Latarjet Procedure in Patients With Anterior Shoulder Instability: Technical Note
    La Banca, Vitor
    Giglio, Luiz
    Vigano, Ana Victoria Palagi
    Michaelis, Luiz Fernando
    Bonadiman, Joao Artur
    Lima, Guilherme Henrique Vieira
    Ikemoto, Roberto Yukio
    [J]. ARTHROSCOPY TECHNIQUES, 2023, 12 (06): : E915 - E922
  • [10] Minimally Invasive High Tibial Osteotomy Using a Patient-Specific Cutting Guide
    Bin Abd Razak, Hamid Rahmatullah
    Jacquet, Christophe
    Wilson, Adrian J.
    Khakha, Raghbir S.
    Kley, Kristian
    Parratte, Sebastien
    Ollivier, Matthieu
    [J]. ARTHROSCOPY TECHNIQUES, 2021, 10 (02): : e431 - e435
12345