Preparation and characterization of alumina hollow fiber membranes

被引:16
|
作者
Wang T. [1 ]
Zhang Y. [1 ]
Li G. [1 ,2 ]
Li H. [1 ]
机构
[1] Key Laboratory of Hollow Fibre Membrane Materials and Membrane Process of Ministry of Education, Tianjin Polytechnic University
[2] College of Material Science and Chemical Engineering, Tianjin Polytechnic University
来源
关键词
Al[!sub]2[!/sub]O[!sub]3[!/sub; Ceramic membranes; Hollow fiber;
D O I
10.1007/s11705-009-0010-2
中图分类号
学科分类号
摘要
With the rapid development of membrane technology in water treatment, there is a growing demand for membrane products with high performance. The inorganic hollow fiber membranes are of great interest due to their high resistance to abrasion, chemical/thermal degradation, and higher surface area/volume ratio therefore they can be utilized in the fields of water treatment. In this study, the alumina (Al2 O3) hollow fiber membranes were prepared by a combined phase-inversion and sintering method. The organic binder solution (dope) containing suspended Al2O3 powders was spun to a hollow fiber precursor, which was then sintered at elevated temperatures in order to obtain the Al2O3 hollow fiber membrane. The dope solution consisted of polyethersulfone (PES), Nmethyl-2-pyrrolidone (NMP) and polyvinylpyrrolidone (PVP), which were used as polymer binder, solvent and additive, respectively. The prepared Al2O3 hollow fiber membranes were characterized by a scanning electron microscope (SEM) and thermal gravimetric analysis (TG). The effects of the sintering temperature and Al2 O3/PES ratios on the morphological structure, pure water flux, pore size and porosity of the membranes were also investigated extensively. The results showed that the pure water flux, maximum pore size and porosity of the prepared membranes decreased with the increase in Al2O3/PES ratios and sintering temperature. When the Al2O3/PES ratio reached 9, the pure water flux and maximum pore size were at 2547 L/m2·h and 1.4 μm, respectively. Under 1600dgC of sintering temperature, the pure water flux and maximum pore size reached 2398 L/(m2·h) and 2.3 μm, respectively. The results showed that the alumina hollow fiber membranes we prepared were suitable for the microfiltration process. The morphology investigation also revealed that the prepared Al2O3 hollow fiber membrane retained its - asymmetric structure even after the sintering process. © Higher Education Press and Springer-Verlag GmbH 2009.
引用
收藏
页码:265 / 271
页数:6
相关论文
共 50 条
  • [1] Preparation and characterization of alumina hollow fiber membrane
    Li, JS
    Hao, YX
    Wang, LJ
    Zhao, BC
    [J]. CHINESE JOURNAL OF CATALYSIS, 2001, 22 (05) : 437 - 440
  • [2] Preparation and characterization of inorganic hollow fiber membranes
    Tan, XY
    Liu, SM
    Li, K
    [J]. JOURNAL OF MEMBRANE SCIENCE, 2001, 188 (01) : 87 - 95
  • [3] Preparation and characterization of microporous polyethylene hollow fiber membranes
    Shen, LQ
    Xu, ZK
    Xu, YY
    [J]. JOURNAL OF APPLIED POLYMER SCIENCE, 2002, 84 (01) : 203 - 210
  • [4] Preparation and characterization of novel hollow fiber composite membranes
    Li Yunqing
    Xi Danli
    [J]. PROCEEDINGS OF THE 2007 INTERNATIONAL CONFERENCE ON ADVANCED FIBERS AND POLYMER MATERIALS VOLS 1 AND 2, 2007, : 555 - 558
  • [5] Preparation and characterization of ultrathin alumina hollow fiber microfiltration membrane
    Choi, In-Hwan
    Kim, In-Chul
    Min, Byoung-Ryol
    Lee, Kew-Ho
    [J]. DESALINATION, 2006, 193 (1-3) : 256 - 259
  • [6] Preparation and characterization of polyvinylidene fluoride (PVDF) hollow fiber membranes
    Wang, DL
    Li, K
    Teo, WK
    [J]. JOURNAL OF MEMBRANE SCIENCE, 1999, 163 (02) : 211 - 220
  • [7] Preparation and characterization of nanoclay loaded polyacrylonitrile hollow fiber membranes
    Nouri, Mahdi
    Abbasi, Marjan
    Aghebati, Tara
    Shirzadkhan, Mahsa
    [J]. JOURNAL OF THE TEXTILE INSTITUTE, 2022, 113 (05) : 952 - 960
  • [8] Preparation and characterization of polyvinylidene fluoride hollow fiber membranes for ultrafiltration
    Khayet, M
    Feng, CY
    Khulbe, KC
    Matsuura, T
    [J]. POLYMER, 2002, 43 (14) : 3879 - 3890
  • [9] Alumina Hollow Fiber Supported ZIF-7 Membranes: Synthesis and Characterization
    Yao, Jianfeng
    Li, Dan
    Wang, Kun
    He, Li
    Xu, Gengsheng
    Wang, Huanting
    [J]. JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 2013, 13 (02) : 1431 - 1434
  • [10] Preparation and characterization of alumina membranes and alumina–titania composite membranes
    Li Shi
    Ning-Bew Wong
    [J]. Journal of Materials Research, 1999, 14 : 3599 - 3603