The Influence of Technological Conditions for Forming Adhesive Primer on Coating Properties As Well As the Strength of Adhesive Joints Made with the Use of Adhesive Primer

被引：0
|
作者：
Kuznetsova V.A. [1 ]
Petrova A.P. [1 ]
Shapovalov G.G. [1 ]
Emelyanov V.V. [1 ]
机构：
[1] Federal State Unitary Enterprise “All-Russian Scientific Research Institute of Aviation Materials”, State Research Center of the Russian Federation, Moscow
来源：
Polymer Science, Series D | 2022年 / 15卷 / 4期
关键词：
adhesive bond; adhesive primer; adhesive strength; elasticity; hardness; shear strength;
D O I：
10.1134/S1995421222040293
中图分类号：
学科分类号：
摘要：
Abstract: An anticorrosion primer based on an epoxy oligomer modified with acrylonitrile butadiene carboxylate rubber cured with an organosilicon amine (γ-aminopropyltriethoxysilane) was used as an object of research. The influence of the formation mode (with the use of convection and thermoradiation drying) on the properties of an adhesive protective coating based on an epoxy–rubber primer has been studied. The optimal conditions for the formation of a primer coating that ensure its maximum adhesive strength are determined. The strength of adhesive joints in shear and uniform separation was determined using Elasil 137-175M adhesive–sealant without a primer coating, as well as with a coating, in the initial state, and after thermal aging, in addition to after tests in water and a tropical chamber. © 2022, Pleiades Publishing, Ltd.
引用
收藏
页码：562 / 567
页数：5
相关论文
共 50 条
  • [1] The influence of the EP-0234 adhesive primer on the properties of adhesive joints made using VK-50 phenolic–rubber adhesive
    Petrova A.P.
    Anikhovskaya L.I.
    [J]. Petrova, A.P. (admin@viam.ru), 2016, Maik Nauka Publishing / Springer SBM (09) : 374 - 376
  • [2] The effect of primers on adhesive properties and strength of adhesive joints made with polyurethane adhesives
    Rudawska, Anna
    Bociaga, Elzbieta
    Olewnik-Kruszkowska, Ewa
    [J]. JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2017, 31 (03) : 327 - 344
  • [3] The influence of curing conditions on the strength of adhesive joints
    Rudawska, Anna
    [J]. JOURNAL OF ADHESION, 2020, 96 (1-4): : 402 - 422
  • [4] The Influence of Technological Factors on the Strength of Adhesive Joints of Steel Sheets
    Doluk, Elzbieta
    Rudawska, Anna
    Brunella, Valentina
    [J]. ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL, 2020, 14 (01) : 107 - 115
  • [5] Adhesive properties and adhesive joints strength of graphite/epoxy composites
    Rudawska, Anna
    Stancekova, Dana
    Cubonova, Nadezda
    Vitenko, Tetiana
    Muller, Miroslav
    Valasek, Petr
    [J]. 12TH INTERNATIONAL CONFERENCE ON DAMAGE ASSESSMENT OF STRUCTURES, 2017, 842
  • [6] Influence of Adhesive Compound Viscosity on the Strength Properties of 1.0503 Steel Sheets Adhesive Joints
    Miturska-Baranska, Izabela
    Rudawska, Anna
    [J]. ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL, 2022, 16 (02) : 196 - 205
  • [7] Comparative Evaluation of Shear Bond Strength of Brackets Bonded with self Etch Primer/Adhesive and Conventional Etch/Primer and Adhesive System
    Bhattacharjee, Debarshi
    Sharma, Kanchan
    Rajalaxmi, Sahu
    Neha, Komal
    Kumari, Archana
    Rai, Anurag
    [J]. JOURNAL OF PHARMACY AND BIOALLIED SCIENCES, 2021, 13 (06): : S1168 - S1173
  • [8] The influence of inclusions on the strength of adhesive joints
    Sargent, JP
    [J]. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2006, 26 (03) : 151 - 161
  • [9] Effect of Exclusive Primer and Adhesive on Microtensile Bond Strength of Self-Adhesive Resin Cement to Dentin
    Kim, Bit-Na
    Son, Sung-Ae
    Park, Jeong-Kil
    [J]. MATERIALS, 2020, 13 (10)
  • [10] The Influence of Adhesive Compounds Biochemical Modification on the Mechanical Properties of Adhesive Joints
    Rudawska, Anna
    Haniecka, Izabela
    Jaszek, Magdalena
    Stefaniuk, Dawid
    [J]. POLYMERS, 2018, 10 (04)
12345