Experimental study on compressive, flexural and fatigue behavior of warp-knitted spacer fabrics reinforced polyurethane cast elastomer composites

This paper reports an experimental study on compressive, flexural and fatigue behavior of polyurethane cast elastomers (PCE) reinforced with warp-knitted spacer fabrics (WKSF). It aims to investigate new applications for these fabrics as the reinforcements for elastomeric parts such as shoe soles, rubber floor coverings, vibration dampening and shock absorbing pads, etc. A series of polyester WKSF with different thickness, structure of outer layer fabric and spacer yarns density was prepared and converted to PCE reinforced WKSF using the hand molding method. All the samples, including the neat PCE, were subjected to static compression, flat and spherical compression, three-point bending and flexural fatigue tests. The results showed that reinforcing PCE with WKSF, considerably enhances its spherical compressive strength (concentrated loading), flexural strength and fatigue resistance. However, it deteriorates flat compressive strength (distributed loading) and recovery behavior after static compression loading. The effect of fiber weight fraction, thickness, structure of outer layer fabric and spacer yarns density on the mentioned properties of the composites was discussed in the paper.