Microstructural Evolution of Inconel 718 During Pancake Forging

被引：0
|
作者：
S. Chenna Krishna
N. K. Karthick
Ashok Kumar Avula
Abhay K. Jha
Bhanu Pant
Roy M. Cherian
机构：
[1] Vikram Sarabhai Space Centre,Materials and Mechanical Entity
[2] Rajiv Gandhi University of Knowledge Technologies,Department of Metallurgical and Materials Engineering
来源：
Transactions of the Indian Institute of Metals | 2019年 / 72卷
关键词：
Inconel 718; JMAK model; Dynamic recrystallization; Grain size;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Pancake forging of Inconel 718 was performed using a hydraulic press at temperature of 1273 and 1323 K. The effect of forging temperature on the microstructure of the pancakes was studied using optical microscopy. Variation in the microstructure was observed at different locations of the pancakes with fully recrystallized grains, partially recrystallized grains and necklace structure. Strain, strain rate and temperature across the pancake were determined through FEM analysis, and Johnson–Mehl–Avrami–Kolmogorov (JMAK) type model was employed to estimate the recrystallized grain size and volume fraction. There was close match between the predicted values and actual measurements.
引用
收藏
页码：1485 / 1488
页数：3
相关论文
共 50 条
  • [1] Microstructural Evolution of Inconel 718 During Pancake Forging
    Krishna, S. Chenna
    Karthick, N. K.
    Avula, Ashok Kumar
    Jha, Abhay K.
    Pant, Bhanu
    Cherian, Roy M.
    [J]. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2019, 72 (06) : 1485 - 1488
  • [2] Microstructural behaviour in Rotary Forging of Inconel 718
    Mangas, Angela
    Santos, Maite
    San Jose, Juan
    Atxaga, Garbine
    Adarraga, Olatz
    [J]. MATERIAL FORMING - ESAFORM 2012, PTS 1 & 2, 2012, 504-506 : 169 - 174
  • [3] Evolution of microstructural characteristics during creep behavior of Inconel 718 alloy
    Wang, Qian
    Ge, Shuxin
    Wu, Dayong
    Ma, Haikun
    Kang, Jie
    Liu, Meng
    Wang, Tao
    Narayanaswamy, Balaji
    Su, Ru
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 857
  • [4] Microstructural evolution of Inconel* 718 during ingot breakdown: process modelling and validation
    Dandre, CA
    Roberts, SM
    Evans, RW
    Reed, RC
    [J]. MATERIALS SCIENCE AND TECHNOLOGY, 2000, 16 (01) : 14 - 25
  • [5] Processing and microstructural evolution of superalloy inconel 718 during hot tube extrusion
    Zhang, SH
    Wang, ZT
    Qiao, B
    Xu, Y
    Xu, TF
    [J]. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2005, 21 (02) : 175 - 178
  • [6] Processing and Microstructural Evolution of Superalloy Inconel 718 during Hot Tube Extrusion
    Shihong ZHANG
    [J]. Journal of Materials Science & Technology, 2005, (02) : 175 - 178
  • [7] Evaluation of an Inconel® alloy 718 microstructural evolution model
    Jaramillo, RA
    Suarez, FS
    Plyburn, JA
    Camus, DE
    Evans, RW
    [J]. SUPERALLOYS 718, 625, 706 AND VARIOUS DERIVATIVES, 1996, : 257 - 266
  • [8] Exploring the microstructural evolution of inconel® 718 during ingot breakdown:: Optimising the cogging process
    Dandre, CA
    Evans, RW
    Reed, RC
    Roberts, SM
    [J]. COMPASS 1999 : COMPONENT OPTIMISATION FROM MATERIALS PROPERTIES AND SIMULATION SOFTWARE, 1999, : 89 - 96
  • [9] Microstructural Evolution of Inconel 718 during Aging and Its Correlation with Electric Conductivity Measurements
    Ariel Mata-Rodriguez, Marcos
    Arturo Garcia-Renteria, Marco
    Rafael Ambriz-Rojas, Ricardo
    Angel Cabral-Miramontes, Jose
    Hugo Lopez-Morelos, Victor
    del Carmen Ramirez-Lopez, Maria
    Fernando Curiel-Lopez, Francisco
    [J]. MATERIALS PERFORMANCE AND CHARACTERIZATION, 2022, 11 (01) : 267 - 277
  • [10] Microstructural change during laser welding of Inconel 718
    Sharma, Sumit K.
    Biswas, K.
    Nath, A. K.
    Manna, I.
    Majumdar, J. Dutta
    [J]. OPTIK, 2020, 218
12345