Correction to: Optimization of drilling parameters in hybrid (Al6061/SiC/B4C/talc) composites by grey relational analysis

被引:0
|
作者
C. Ramesh Kumar
V. JaiGanesh
R. Ravi Raja Malarvannan
机构
[1] Sriram Engineering College,Department Mechanical Engineering
[2] SA Engineering College,Department of Mechanical Engineering
[3] Saveetha Engineering College,Department of Mechanical Engineering
关键词
D O I
暂无
中图分类号
学科分类号
摘要
In the original version of this article, the contents of the Table 2 were incorrectly published. This is a corrected version of the Table 2.
引用
收藏
相关论文
共 50 条
  • [1] Optimization of drilling parameters in hybrid (Al6061/SiC/B4C/talc) composites by grey relational analysis
    C. Ramesh Kumar
    V. JaiGanesh
    R. Ravi Raja Malarvannan
    [J]. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2019, 41
  • [2] Optimization of drilling parameters in hybrid (Al6061/SiC/B4C/talc) composites by grey relational analysis
    Kumar, C. Ramesh
    JaiGanesh, V.
    Malarvannan, R. Ravi Raja
    [J]. JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2019, 41 (03)
  • [3] Optimization of drilling parameters in hybrid (Al6061/SiC/B4C/talc) composites by grey relational analysis (vol 41, 155, 2019)
    Kumar, C. Ramesh
    JaiGanesh, V.
    Malarvannan, R. Ravi Raja
    [J]. JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2019, 41 (04)
  • [4] Process optimization using grey relational analysis in dry sliding wear behavior on SiC/B4C/Talc reinforced Al 6061 hybrid metal matrix composite
    Kumar, Chellamuthu Ramesh
    Baskar, Subramanian
    Ramesh, Ganesan
    Gurusamy, Pathinettampadian
    Maridurai, Thirupathy
    [J]. METALLURGICAL RESEARCH & TECHNOLOGY, 2021, 118 (06)
  • [5] Wear and mechanical properties of Al6061/SiC/B4C hybrid composites produced with powder metallurgy
    Halil, Karakoç
    Ismail, OvalI
    Sibel, Dündar
    Ramazan, ÇItak
    [J]. Journal of Materials Research and Technology, 2019, 8 (06) : 5348 - 5361
  • [6] Wear and mechanical properties of Al6061/SiC/B4C hybrid composites produced with powder metallurgy
    Karakoc, Halil
    Ovali, Ismail
    Dundar, Sibel
    Citak, Ramazan
    [J]. JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2019, 8 (06): : 5348 - 5361
  • [7] Wear properties of Al6061/SiC + B4C + TiC hybrid composites produced by vacuum infiltration method
    Duru, Nurcihan
    Kaner, Sidem
    Kaplan, Yavuz
    Sever, Nimet Kardes
    Ozer, Alpay
    Aksoz, Sinan
    [J]. Materialpruefung/Materials Testing, 2024, 66 (12): : 2087 - 2097
  • [8] Influence of B4C particle reinforcement on mechanical and machining properties of Al6061/B4C composites
    Karabulut, Sener
    Karakoc, Halil
    Citak, Ramazan
    [J]. COMPOSITES PART B-ENGINEERING, 2016, 101 : 87 - 98
  • [9] Tribological behaviour of aluminium based hybrid metal matrix composites (Al6061/B4C/ZrO2/SiC)
    Muzeer, S.
    [J]. MATERIALS TODAY-PROCEEDINGS, 2022, 56 : 507 - 513
  • [10] Optimization of Process Variables in the Drilling of LM6/B4C Composites through Grey Relational Analysis
    Rubi, C. Sarala
    Prakash, J. Udaya
    Cep, Robert
    Elangovan, Muniyandy
    [J]. MATERIALS, 2022, 15 (14)