Wear-corrosion of cast iron thermal spray coating on Al alloy for automotive components

被引：0
|
作者：
W. J. Kim
J. G. Kim
Y. S. Kim
Ismail Ozdemir
Y. Tsunekawa
机构：
[1] Sungkyunkwan University,Department of Advanced Materials Engineering
[2] Andong National University,School of Advanced Materials Engineering
[3] Dokuz Eylul Univ. Dept. of Metallurgical and Materials Eng,Material Processing Lab
[4] Toyota Technological Institute,undefined
来源：
Metals and Materials International | 2007年 / 13卷
关键词：
wear; corrosion; EIS; automotive; thermal spray coating;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
For the modification of an automotive cylinder block, two types of water-atomized cast iron powders were deposited onto an aluminum alloy substrate by atmospheric DC plasma spraying. The wear-corrosion characteristics of the coatings were investigated by means of a wear test and EIS. The pre-annealed and graphitized coating improved the wear-corrosion resistance in a deaerated 0.5M H2SO4 solution.
引用
收藏
相关论文
共 50 条
  • [1] Wear-corrosion of cast iron thermal spray coatings on Al alloy for automotive components
    Kim, W. J.
    Kim, J. G.
    Kim, Y. S.
    Ozdemir, Ismail
    Tsunekawa, Y.
    METALS AND MATERIALS INTERNATIONAL, 2007, 13 (04) : 317 - 321
  • [2] Wear-corrosion study of white cast irons
    Watson, S.W., 1600, Elsevier Science S.A., Lausanne, Switzerland (181-183):
  • [3] The Corrosion and Wear-Corrosion of the Iron-Base Amorphous Coating Prepared by the HVOF Spraying
    Liao, Pin-Hsun
    Jian, Jing-Wei
    Tsay, Leu-Wen
    METALS, 2023, 13 (06)
  • [4] WEAR-CORROSION RESISTANT AS-CAST 28CR WHITE CAST IRON.
    He Lin
    Zhou Qingde
    Jixie goneheng Xuebao, 1987, 23 (01): : 1 - 10
  • [5] Effect of the Applied Voltages on the Corrosion-Wear Behavior of Thermal Spray Al Coating
    Jian, Shun-Yi
    Sheu, Hung-Hua
    Chang, Jun-Kai
    Chen, Chih-Hung
    Hong, Yuan-Huan
    Lin, Ming-Hsun
    Lee, Hung-Bin
    LUBRICANTS, 2022, 10 (08)
  • [6] Corrosion performance of plasma-sprayed cast iron coatings on aluminum alloy for automotive components
    Kim, WJ
    Ahn, SH
    Kim, HG
    Kim, JG
    Ozdemir, I
    Tsunekawa, Y
    SURFACE & COATINGS TECHNOLOGY, 2005, 200 (1-4): : 1162 - 1167
  • [7] Wear-Corrosion Synergism in a CoCrMo Hip Bearing Alloy Is Influenced by Proteins
    Mathew, Mathew T.
    Jacobs, Joshua J.
    Wimmer, Markus A.
    CLINICAL ORTHOPAEDICS AND RELATED RESEARCH, 2012, 470 (11) : 3109 - 3117
  • [8] The advantages of the plasma spray process for the coating of cylinder bores on AlSi cast alloy in automotive industry
    Barbezat, G
    Wuest, G
    SURFACE MODIFICATION TECHNOLOGIES XI, 1998, : 223 - 233
  • [9] Microstructural features, wear, and corrosion behaviour of spray cast Al-Si alloys
    Raju, K.
    Harsha, A. P.
    Ojha, S. N.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2011, 225 (J3) : 151 - 160
  • [10] Arc Thermal Spray NiCr20 Alloy Coating: Fabrication, Sealant, Heat Treatment, Wear, and Corrosion Resistances
    Van Tuan Nguyen
    Quy Le Thu
    Tuan Anh Nguyen
    Quoc Cuong Ly
    Ly Pham Thi
    Ha Pham Thi
    Thanh Dinh Thi Mai
    INTERNATIONAL JOURNAL OF ELECTROCHEMISTRY, 2019, 2019
12345