Water-Jet Cutting of Glass Sheet

被引：0

作者：

Bazenov G.M. ^{[1
]}

Itybaeva G.T. ^{[1
]}

Kasenov A.Z. ^{[1
]}

Yanyushkin A.S. ^{[2
]}

机构：

[1] Toraighyrov University, Pavlodar

[2] Ulianov Chuvash State University, Chuvash Republic, Cheboksary

来源：

Russian Engineering Research | 2022年 / 42卷 / 10期

关键词：

abrasive machining; computer simulation; cutting jets; water-jet cutting;

D O I：

10.3103/S1068798X22100045

中图分类号：

学科分类号：

摘要：

Abstract: Water-jet cutting of glass is considered. Data are presented regarding its applicability, advantages, disadvantages, and potential. In water-jet cutting, the following parameters are most significant: the jet velocity, abrasive grain size, jet inclination, and the distance from the nozzle to the machined surface. Computer simulation shows that, in water-jet cutting, the stress in the glass is lower than in mechanical cutting by a roller. That corresponds to minimal heat liberation and a precise cut with surface roughness Ra = 1.6 µm at the edges. © 2022, Allerton Press, Inc.

引用

页码：1045 / 1048

页数：3

共 50 条

[1] Water-Jet Cutting of Fiberglass Sheet
Barsukov G.V.
Zhuravleva T.A.
Kozhus O.G.
[J]. Russian Engineering Research, 2020, 40 (11) : 963 - 965
[2] WATER-JET CUTTING
不详
[J]. AIRCRAFT ENGINEERING AND AEROSPACE TECHNOLOGY, 1994, 66 (02): : 5 - 6
[3] Water-jet cutting in powder metallurgy
Anders, Sven
[J]. CFI-CERAMIC FORUM INTERNATIONAL, 2007, 84 (10): : E12 - E13
[4] Innovative water-jet cutting machine
不详
[J]. INDUSTRIAL CERAMICS, 2001, 21 (01): : 59 - 59
[5] Water-jet cutting in medical use -: an overview
Honl, M
Rentzsch, R
Üebeyli, H
Hille, E
Morlock, M
Louis, H
[J]. 15TH INTERNATIONAL CONFERENCE ON JETTING TECHNOLOGY, 2000, (41): : 183 - 196
[6] Water-jet cutting: Staubli and the automotive suppliers
不详
[J]. INDUSTRIAL ROBOT-AN INTERNATIONAL JOURNAL, 1996, 23 (04) : 41 - 42
[7] WATER-JET PUTS SURGEONS AT THE CUTTING EDGE
BEAR, J
[J]. NEW SCIENTIST, 1994, 143 (1935) : 20 - 20
[8] Offline programming of water-jet cutting robots
Raff, J
[J]. KUNSTSTOFFE-PLAST EUROPE, 2001, 91 (03): : 72 - 72
[9] Standard cells for robotic water-jet cutting
不详
[J]. INDUSTRIAL ROBOT-AN INTERNATIONAL JOURNAL, 2003, 30 (05) : 468 - 468
[10] A Research on Surface Morphology of Cutting of Titanium Sheet with Water-Jet Guided Laser and Conventional Laser
Li, Chunqi
Yang, Lijun
Wang, Yang
[J]. PRODUCT DESIGN AND MANUFACTURE, 2012, 120 : 366 - +

← 1 2 3 4 5 →