Effect of filler surface morphology on the impact behaviour of hydroxyapatite reinforced high density polyethylene composites

被引：0
|
作者：
Y. Zhang
K. E. Tanner
机构：
[1] Queen Mary University of London,Department of Materials
来源：
Journal of Materials Science: Materials in Medicine | 2008年 / 19卷
关键词：
Coupling Agent; HDPE; Impact Resistance; Impact Behaviour; Strong Interfacial Bonding;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Instrumented falling weight impact tests have been carried out to characterize the impact behaviour of hydroxyapatite reinforced high-density polyethylene composite (HA-HDPE) in order to use this biomaterial in skull implants. The effects of HA filler surface morphology and volume fraction on the fracture toughness were studied, and fracture mechanism investigated. Impact resistance was found to be markedly improved by using a sintered grade HA filler with smooth particle surface instead of spray dried grade HA with rough surface. SEM examination of impacted fracture surfaces revealed that the improvement of impact resistance was due to the stronger interfacial bonding between smooth HA particles and HDPE polymer matrix compared with that between rough HA and HDPE, which results in more energy absorption during impact and hence better fracture resistance.
引用
收藏
页码：761 / 766
页数：5
相关论文
共 50 条
  • [1] Effect of filler surface morphology on the impact behaviour of hydroxyapatite reinforced high density polyethylene composites
    Zhang, Y.
    Tanner, K. E.
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE, 2008, 19 (02) : 761 - 766
  • [2] Effect of Hydroxyapatite Reinforced High Density Polyethylene Composites on Mechanical and Bioactivity Properties
    Husin, Muhamad Rasyidi
    Wahit, Mat Uzir
    Kadir, Mohammed Rafiq Abdul
    Rahman, Wan Aizan Wan Abd
    COMPOSITE SCIENCE AND TECHNOLOGY, PTS 1 AND 2, 2011, 471-472 : 303 - +
  • [3] Impact behavior of hydroxyapatite reinforced polyethylene composites
    Y. Zhang
    K. E. Tanner
    Journal of Materials Science: Materials in Medicine, 2003, 14 : 63 - 68
  • [4] Impact behavior of hydroxyapatite reinforced polyethylene composites
    Zhang, Y
    Tanner, KE
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE, 2003, 14 (01) : 63 - 68
  • [5] Effect of hydroxyapatite morphology/surface area on the rheology and processability of hydroxyapatite filled polyethylene composites
    Joseph, R
    McGregor, WJ
    Martyn, MT
    Tanner, KE
    Coates, PD
    BIOMATERIALS, 2002, 23 (21) : 4295 - 4302
  • [6] Creep in polyethylene and hydroxyapatite reinforced polyethylene composites
    Suwanprateeb, J
    Tanner, KE
    Turner, S
    Bonfield, W
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE, 1995, 6 (12) : 804 - 807
  • [7] Rice straw, inorganic filler reinforced R-polyethylene composites: Morphology and surface energy analysis
    Huang, Runzhou
    Yu, Min
    Zhou, Chengjun
    Wu, Qinlin
    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 2015, 250
  • [8] Hydroxyapatite polyethylene composites: Effect of grafting and surface treatment of hydroxyapatite
    Deb, S
    Wang, M
    Tanner, KE
    Bonfield, W
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE, 1996, 7 (04) : 191 - 193
  • [9] Cyclic loading effect on the mechanical behaviour and morphology of the high density polyethylene
    Fatmi, L.
    Rouili, A.
    Hamlaoui, N.
    MECHANIKA, 2007, (05): : 43 - 47
  • [10] Processability, morphology and mechanical properties of wood flour reinforced high density polyethylene composites
    Kuan, HC
    Huang, JM
    Ma, CCM
    Wang, FY
    PLASTICS RUBBER AND COMPOSITES, 2003, 32 (03) : 122 - 126
12345