Determination of characteristic strength and stiffness values in glued laminated beams of Argentinean Eucalyptus grandis according to European standards Bestimmung der charakteristischen Festigkeits- und Steifigkeitswerte nach europäischen Normen von Brettschichtholzträgern aus Eucalyptus grandis aus Argentinien

被引:0
|
作者
J. C. Piter
A. D. Cotrina
M. A. Sosa Zitto
P. M. Stefani
E. A. Torrán
机构
[1] Universidad Tecnológica Nacional,Departamento de Ingeniería Civil, Facultad Regional Concepción del Uruguay
[2] UNMdP–CONICET,División Polímeros INTEMA–Facultad de Ingeniería
关键词
Timber; Lamination; European Standard; Deciduous Species; Strength Class;
D O I
10.1007/s00107-006-0161-5
中图分类号
学科分类号
摘要
The present paper reports the results of an investigation regarding the determination of characteristic strength and stiffness values in glued laminated beams of fast-growth Argentinean Eucalyptus grandis according to the criteria established in European standards. An empirical research project with 100 beams in structural sizes and 191 finger-jointed laminations was carried out. Test results allow to analyse the mechanical property values of this glued laminated timber in comparison with those adopted by the strength class system established in the European standard EN 1194 (1999), and they reveal a very high ratio of modulus of elasticity to density. Test results were also compared with values obtained by means of the equations provided by EN 1194 (1999). The effectiveness of the criteria established in this European standard for determining mechanical properties in beams of this deciduous species is analysed through the discussion of test results and those obtained from calculations based on lamination properties.
引用
收藏
页码:261 / 266
页数:5
相关论文
共 4 条