High current density with spatial distribution of Geobacter in anodic biofilm of the microbial electrolysis desalination and chemical-production cell with enlarged volumetric anode

The aim of this study was to establish the relationship between spatial distribution of Geobacter and electric intensity in the microbial electrolysis desalination and chemical-production cell (MEDCC) and to investigate the effect of enlarged volumetric anode on the performance of MEDCC. The MEDCC was constructed with nine carbon brush anodes (length x diameter = 11 cm x 3 cm) as enlarged volumetric anode, and operated by feeding with 1 g/L acetate as substrate and 35 g/L NaCl as artificial seawater under the applied voltages of 1.2-4.5 V. Spatial distribution of Geobacter in the anodic biofilm was determined according to the bacterial community analysis on 27 biofilm samples from the top, middle and bottom layers of anodes (i.e., with distance of 4.5, 10, and 15.5 cm to the cathode, respectively). Results showed that the enlarged volumetric anode significantly improved the performance of MEDCC. The maximum desalination rate and current density reached 338.5 +/- 21.8 mg/L center dot h and 55.7 +/- 3.7 A/m2 in the MEDCC, respectively. The electric intensity values decreased with the distance from the anode to the cathode and formed an uneven distribution in the anode chamber. The samples in the top layer of anodes had the highest average 16S rRNA gene copy number of Geobacter of 1.55 x 107 copies/mu L, which was 18 times higher than that in the bottom layer of anodes. A linear relation was established between the spatial distribution of Geobacter and electric intensity (R2 = 0.994-0.999). The electric intensity gradient created the uneven spatial distribution of Geobacter in the biofilms of volumetric anode. Results from this study could be useful to enrich Geobacter in the anodic biofilm thus to improve the performance of MEDCC.