Review on Machinability of Fiber Reinforced Polymers: A Drilling Approach

被引：43
|
作者：
Vigneshwaran, S. [1 ]
Uthayakumar, M. [1 ]
Arumugaprabu, V. [1 ]
机构：
[1] Kalasalingam Univ, Fac Mech Engn, Krishnankoil 626126, India
来源：
SILICON | 2018年 / 10卷 / 05期
关键词：
Drilling; Polymers; Delamination; Thrust force; Surface roughness; ARTIFICIAL NEURAL-NETWORK; SURFACE-ROUGHNESS; POINT ANGLE; MACHINING PARAMETERS; CUTTING CONDITIONS; TAGUCHI ANALYSIS; HOLE QUALITY; THRUST FORCE; TOOL WEAR; PART II;
D O I：
10.1007/s12633-018-9764-9
中图分类号：
O64 [物理化学（理论化学）、化学物理学];
学科分类号：
070304 ; 081704 ;
摘要：
Performance of conventional materials in diverse engineering application is not satisfactory due to the development in products design and engineering materials. In this case, fiber reinforced Polymers (FRPs) have attracted the material engineers with their unique properties and their expansion in various applications. The superior characteristics of the FRPs emphasized their advancement in machining performance. So it becomes more significant to analyze their machinability for further improvement in their machining characteristics and applications. The intention of this paper is to review the machining response of FRPs especially on drilling. Concerning FRPs drilling operation the main aspects were focused on glass, natural and carbon fiber reinforced polymers. Drilling damages such as delamination of plies, thrust force, and surface quality in response to various parameter influences were also discussed in detail.
引用
收藏
页码：2295 / 2305
页数：11
相关论文
共 50 条
  • [1] Review on Machinability of Fiber Reinforced Polymers: A Drilling Approach
    S. Vigneshwaran
    M. Uthayakumar
    V. Arumugaprabu
    [J]. Silicon, 2018, 10 : 2295 - 2305
  • [2] MACHINABILITY OF FIBER-REINFORCED THERMOPLASTICS IN DRILLING
    HOCHENG, H
    PUW, HY
    [J]. JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 1993, 115 (01): : 146 - 149
  • [3] Machinability of natural fiber reinforced composites: a review
    Mahmoud M. A. Nassar
    Ramanathan Arunachalam
    Khalid I. Alzebdeh
    [J]. The International Journal of Advanced Manufacturing Technology, 2017, 88 : 2985 - 3004
  • [4] Machinability of natural fiber reinforced composites: a review
    Nassar, Mahmoud M. A.
    Arunachalam, Ramanathan
    Alzebdeh, Khalid I.
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 88 (9-12): : 2985 - 3004
  • [5] Recent advances in drilling of carbon fiber–reinforced polymers for aerospace applications: a review
    Muhammad Aamir
    Majid Tolouei-Rad
    Khaled Giasin
    Ataollah Nosrati
    [J]. The International Journal of Advanced Manufacturing Technology, 2019, 105 : 2289 - 2308
  • [6] Study on the Machinability of Glass, Carbon and Aramid Fiber Reinforced Plastics in Drilling and Secondary Drilling Operations
    Ciecielag, Krzysztof
    [J]. ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL, 2022, 16 (02) : 57 - 66
  • [7] Drilling of fiber reinforced plastics: A review
    Abrao, A. M.
    Faria, P. E.
    Rubio, J. C. Campos
    Reis, P.
    Davim, J. Paulo
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2007, 186 (1-3) : 1 - 7
  • [8] A numerical approach to analyze the burrs generated in the drilling of carbon fiber reinforced polymers (CFRPs)
    Fuji Wang
    Xiaonan Wang
    Xiang Zhao
    Guangjian Bi
    Rao Fu
    [J]. The International Journal of Advanced Manufacturing Technology, 2020, 106 : 3533 - 3546
  • [9] Drilling machinability of resin-less "green" composites reinforced by bamboo fiber
    Mizobuchi, A.
    Takagi, H.
    Sato, T.
    Hino, J.
    [J]. HIGH PERFORMANCE STRUCTURES AND MATERIALS IV, 2008, 97 : 185 - 194
  • [10] A numerical approach to analyze the burrs generated in the drilling of carbon fiber reinforced polymers (CFRPs)
    Wang, Fuji
    Wang, Xiaonan
    Zhao, Xiang
    Bi, Guangjian
    Fu, Rao
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2020, 106 (7-8): : 3533 - 3546
12345