Flow boiling in horizontal tubes: Part 3 - Development of a new heat transfer model based on flow pattern

被引：267

作者：

Kattan, N ^{[1
]}

Thome, JR ^{[1
]}

Favrat, D ^{[1
]}

机构：

[1] Swiss Fed Inst Technol, Lab Ind Energy Syst, Dept Engn Mech, CH-1015 Lausanne, Switzerland

来源：

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME | 1998年 / 120卷 / 01期

关键词：

evaporation; modeling and scaling; multiphase flows;

D O I：

10.1115/1.2830039

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

A new heat transfer model for intube flow, boiling in horizontal plain tubes is proposed that incorporates the effects of local two-phase flow patterns flow stratification, and partial dryout in annular flow. Significantly the local peak in the heat transfer coefficient versus vapor quality can now be determined from the prediction of the location of onset of partial dryout in annular flow. The new method accurately predicts a large, new database of flow boiling data, and is particularly better than existing methods at high vapor qualities (x > 85 percent) and for stratified types of flows.

引用

页码：156 / 165

页数：10

共 50 条

[1] Flow boiling in horizontal flattened tubes: Part II - Flow boiling heat transfer results and model
Quiben, Jesus Moreno
Cheng, Lixin
Lima, Ricardo J. da Silva
Thome, John R.
[J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2009, 52 (15-16) : 3645 - 3653
[2] New flow boiling heat transfer model and flow pattern map for carbon dioxide evaporating inside horizontal tubes
Cheng, Lixin
Ribatski, Gherhardt
Wojtan, Leszek
Thome, John R.
[J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2006, 49 (21-22) : 4082 - 4094
[3] Flow-pattern based prediction of flow boiling heat transfer in horizontal tubes with circumferentially varying heat flux
Weise, Sonja
Dietrich, Benjamin
Wetzel, Thomas
[J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2020, 148
[4] A NEW MODEL FOR PREDICTING FLOW BOILING HEAT TRANSFER COEFFICIENTS IN HORIZONTAL MICROFIN TUBES
Merchant, Reem
Mehendale, Sunil
[J]. PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2016, VOL. 8, 2017,
[5] New Flow Boiling Heat Transfer Model for Hydrocarbons Evaporating Inside Horizontal Tubes
Chen, G. F.
Gong, M. Q.
Wang, S.
Wu, J. F.
Zou, X.
[J]. ADVANCES IN CRYOGENIC ENGINEERING, 2014, 1573 : 1092 - 1098
[6] Flow boiling in horizontal tubes: Part 2 - New heat transfer data for five refrigerants
Kattan, N
Thome, JR
Favrat, D
[J]. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 1998, 120 (01): : 148 - 155
[7] Investigation of flow boiling in horizontal tubes: Part II - Development of a new heat transfer model for stratified-wavy, dryout and mist flow regimes
Wojtan, L
Ursenbacher, T
Thome, JR
[J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2005, 48 (14) : 2970 - 2985
[8] Condensation in horizontal tubes, part 2: new heat transfer model based on flow regimes
Thome, JR
El Hajal, J
Cavallini, A
[J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2003, 46 (18) : 3365 - 3387
[9] Heat transfer in flow boiling over a bundle of horizontal tubes
Burnside, BM
Shire, NF
[J]. CHEMICAL ENGINEERING RESEARCH & DESIGN, 2005, 83 (A5): : 527 - 538
[10] Flow boiling in horizontal tubes: Part 1 - Development of a diabatic two-phase flow pattern map
Kattan, N
Thome, JR
Favrat, D
[J]. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 1998, 120 (01): : 140 - 147

← 1 2 3 4 5 →