Electrodeposition and properties of Ni-W, Fe-W and Fe-Ni-W amorphous alloys. A comparative study

被引:193
|
作者
Donten, M
Cesiulis, H
Stojek, Z
机构
[1] Univ Warsaw, Dept Chem, PL-02093 Warsaw, Poland
[2] Vilnius State Univ, Dept Phys Chem, LT-2006 Vilnius, Lithuania
关键词
electrodeposition; amorphous alloys; tungsten alloys;
D O I
10.1016/S0013-4686(00)00437-0
中图分类号
O646 [电化学、电解、磁化学];
学科分类号
081704 ;
摘要
Thin, micrometre-thick layers of a new amorphous alloy, Fe-Ni-W, have been obtained by electrodeposition. The iron mole fraction, [Fe]/([Fe] + [Ni]), can be changed from 0 to 1, however, the best properties under constant current deposition are obtained for the mole fraction near 0.5. The key, needed properties of the Fe-W and Ni-W alloys were transferred to the Fe-Ni-W alloy, while the unwanted properties of the two-component alloys were eliminated. The new alloy is hard (1040 HV, for equal percentage of Fe and Ni), smooth, of nice appearance, and of good adherence to both steel and copper. Pulse electroplating further improves the smoothness and uniformity of the electrodeposited layers and allows one to obtain higher tungsten content of up to 35 at.%. X-ray diffractometry, EDX, and chronopotentiometry were used to characterise the new material. The influence of pH and the ratio of concentrations of Fe and Ni in the plating solution was examined. (C) 2000 Elsevier Science Ltd. All rights reserved.
引用
收藏
页码:3389 / 3396
页数:8
相关论文
共 50 条
  • [1] Formation of ductile amorphous Ni-W and Fe-W electrodeposits and their nanocrystallization
    Yamasaki, T
    Tomohira, R
    Ogino, Y
    [J]. JAPAN INSTITUTE OF METALS, PROCEEDINGS, VOL 12, (JIMIC-3), PTS 1 AND 2: SOLID - SOLID PHASE TRANSFORMATIONS, 1999, : 1247 - 1250
  • [2] Preparation and magnetic properties of Fe-W and Ni-W composite coatings
    Chiriac, H.
    Moga, A. E.
    Gherasim, C.
    Lupu, N.
    [J]. CAS 2007 INTERNATIONAL SEMICONDUCTOR CONFERENCE, VOLS 1 AND 2, PROCEEDINGS, 2007, : 307 - 310
  • [3] Synthesis and Characterization of Fe-W and Ni-W Composite Coatings
    Chiriac, H.
    Moga, A. E.
    Gherasim, C.
    Lupu, N.
    [J]. ROMANIAN JOURNAL OF INFORMATION SCIENCE AND TECHNOLOGY, 2008, 11 (02): : 123 - 132
  • [4] Properties of electrodeposited amorphous Fe-Ni-W alloy deposits
    何凤姣
    王淼
    陆欣
    [J]. Transactions of Nonferrous Metals Society of China, 2006, (06) : 1289 - 1294
  • [5] Properties of electrodeposited amorphous Fe-Ni-W alloy deposits
    He Feng-jiao
    Wang Miao
    Lu Xin
    [J]. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2006, 16 (06) : 1289 - 1294
  • [6] INVESTIGATION OF SOME ALLOYS OF SYSTEM FE-NI-W
    VARLI, KV
    UMANSKII, YS
    DYAKONOV.NP
    KORNEVA, OS
    [J]. STEEL IN THE USSR, 1972, 2 (01): : 68 - &
  • [7] EFFECT OF BULK CURRENT DENSITY ON TRIBOLOGICAL PROPERTIES OF FE-W, CO-W AND NI-W COATINGS
    Silkin, S. A.
    Gotelyak, A. V.
    Tsyntsaru, N.
    Dikusar, A. I.
    Kreivaitis, R.
    Padgurskas, J.
    [J]. PROCEEDINGS OF VIII INTERNATIONAL SCIENTIFIC CONFERENCE (BALTTRIB' 2015), 2016, : 51 - 56
  • [8] AMORPHOUS NI-W COATINGS BY ELECTRODEPOSITION
    Vicenzo, A.
    Pomati, F.
    Pezzei, A.
    Cavallotti, P. L.
    [J]. METALLURGIA ITALIANA, 2009, (10): : 39 - 47
  • [9] Amorphous NI-W coatings by electrodeposition
    Vicenzo, A.
    Pomati, F.
    Pezzei, A.
    Cavallotti, P.L.
    [J]. Metallurgia Italiana, 2009, 101 (09): : 39 - 47
  • [10] Corrosion behaviour of electrodeposited nanocrystalline Ni-W and Ni-Fe-W alloys
    Sriraman, K. R.
    Ganesh Sundara Raman, S.
    Seshadri, S. K.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 460 (39-45): : 39 - 45