Partitioning characteristics of targeted heavy metals in IZAYDAS hazardous waste incinerator

被引:31
|
作者
Bakoglu, M [1 ]
Karademir, A [1 ]
Ayberk, S [1 ]
机构
[1] Kocaeli Univ, Dept Environm Engn, Kocaeli, Turkey
关键词
incineration; hazardous wastes; heavy metals; ESP; wet scrubbers;
D O I
10.1016/S0304-3894(03)00009-8
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
Partitioning of eight targeted heavy metals (Cr, Mn, Cu, Ph, Sn, Co, Ni and Zn) was carried out during five trial bums in Izmit hazardous and clinical waste incinerator (IZAYDAS). Metal contents of the original wastes and their concentration in the bottom ash (BA), fly ash (FA), filter cake (FC) and flue gas were determined. Partitioning behavior of metals during the two-stage incineration was evaluated with respect to physico-chemical properties of feed waste and metals, and the operational conditions. Results suggest that combustion temperatures and retention times are the dominant parameters determining the volatility of metals in the first combustion chamber. Targeted metals were generally partitioned in the rank of bottom ash, filter cake, fly ash and flue gas. High filter cake/fly ash ratios showed that high temperatures in the second stage increase both the formation of gaseous metallic compounds and the enrichment of metals in fine particles. Since ESP could not be effective in removing fine particles and volatilized metallic compounds, the necessity of an additional system that would remove heavy metals efficiently was emphasized for the modem incinerators. (C) 2003 Elsevier Science B.V. All rights reserved.
引用
收藏
页码:89 / 105
页数:17
相关论文
共 50 条
  • [1] Distribution and leaching characteristics of heavy metals in a hazardous waste incinerator
    Li, Wenhan
    Ma, Zengyi
    Huang, Qunxing
    Jiang, Xuguang
    FUEL, 2018, 233 : 427 - 441
  • [2] PARTITIONING OF HEAVY METALS IN THE ISTAC MEDICAL WASTE INCINERATOR
    Ozturk, H. I.
    Alp, K.
    Hanedar, A.
    Avsar, E.
    Malak, U.
    GLOBAL NEST JOURNAL, 2013, 15 (01): : 37 - 48
  • [3] Pollution emission characteristics, distribution of heavy metals, and particle morphologies in a hazardous waste incinerator processing phenolic waste
    Wang, Chen
    Shao, Ningning
    Xu, Jiyun
    Zhang, Zuotai
    Cai, Zongwei
    JOURNAL OF HAZARDOUS MATERIALS, 2020, 388 (388)
  • [4] PCDD/F removal efficiencies of electrostatic precipitator and wet scrubbers in izaydas hazardous waste incinerator
    Karademir, A
    Bakoglu, M
    Ayberk, S
    FRESENIUS ENVIRONMENTAL BULLETIN, 2003, 12 (10): : 1228 - 1232
  • [5] BEHAVIOR AND CONTROL OF METALS IN A HAZARDOUS-WASTE INCINERATOR
    HINSHAW, GD
    HAZARDOUS WASTE & HAZARDOUS MATERIALS, 1994, 11 (01): : 93 - 109
  • [6] Leaching characteristics of heavy metals in municipal solid waste incinerator fly ash
    Liu, Feng
    Liu, Jianguo
    Yu, Qianfeng
    Jin, Yiying
    Nie, Yongfeng
    Journal of Environmental Science and Health - Part A Toxic/Hazardous Substances and Environmental Engineering, 2005, 40 (10): : 1975 - 1985
  • [7] Leaching characteristics of heavy metals in municipal solid waste incinerator fly ash
    Liu, F
    Liu, JG
    Yu, QF
    Jin, YY
    Nie, YF
    JOURNAL OF ENVIRONMENTAL SCIENCE AND HEALTH PART A-TOXIC/HAZARDOUS SUBSTANCES & ENVIRONMENTAL ENGINEERING, 2005, 40 (10): : 1975 - 1985
  • [8] Heavy metals partitioning in waste incineration
    Galeotti, L
    Lombardi, F
    Polettini, A
    Sirini, P
    ENVIRONMENTAL ENGINEERING & RENEWABLE ENERGY, 1998, : 349 - 357
  • [9] Heavy Metals Uptake by Trees near a Waste Incinerator
    Morichetti, Mauro
    Passerini, Giorgio
    Baltrenas, Pranas
    Baltrenaite, Edita
    Corvatta, Gianni
    10TH INTERNATIONAL CONFERENCE ENVIRONMENTAL ENGINEERING (10TH ICEE), 2017,
  • [10] Gas/particle partitioning of PCDD/Fs in flue gas of hazardous waste incinerator
    Ji, Ya
    Lu, Sheng-Yong
    Lin, Xiao-Qing
    Li, Xiao-Dong
    Yan, Jian-Hua
    Zhejiang Daxue Xuebao (Gongxue Ban)/Journal of Zhejiang University (Engineering Science), 2012, 46 (07): : 1238 - 1242