Two-layer light emitting diodes prepared by the sol-gel route

被引:0
|
作者
De Morais, TD [1 ]
Chaput, F
Boilot, JP
Lahlil, K
Darracq, B
Lévy, Y
机构
[1] Ecole Polytech, UMR CNRS 7643, Phys Mat Condensee Lab, Grp Chim Solide, F-91128 Palaiseau, France
[2] St Gobain Rech, F-93303 Aubervilliers, France
[3] Univ Orsay Paris 11, UMR CNRS 8501, Lab Charles Fabry, Inst Opt, F-91403 Orsay, France
关键词
hybrid light-emitting diodes (HLED); green emission; multilayer devices; hole transporting gels; sol-gel precursors; grafting of molecules;
D O I
暂无
中图分类号
P1 [天文学];
学科分类号
0704 ;
摘要
We have elaborated organic-inorganic hybrid light-emitting diodes (HLED). These devices emitting in the green are formed of two hybrid thin layers, exhibiting different functionalities, which are sandwiched between indium-tin oxide (ITO) and metallic electrodes. These layers have been prepared from silane precursors modified with hole transporting units and light-emitting naphthalimide moieties by the sol-gel technique. The hole transporting sol-gel layers exhibit about the same charge mobility as organic polymers having equivalent active units. The maximum external quantum efficiency of the best diode using LiF/Al cathode is about 1% and the luminance reaches 4000 cd.m(-2). (C) 2000 Academie des sciences/Editions scientifiques et medicales Elsevier SAS.
引用
收藏
页码:479 / 491
页数:13
相关论文
共 50 条
  • [1] A promising red-emitting phosphor for white light emitting diodes prepared by sol-gel method
    Guo, Chongfeng
    Zhang, Wei
    Luan, Lin
    Chen, Tao
    Cheng, Hong
    Huang, Dexiu
    SENSORS AND ACTUATORS B-CHEMICAL, 2008, 133 (01) : 33 - 39
  • [2] A promising blue-green emitting phosphor for white light-emitting diodes prepared by sol-gel method
    Yao, Shanshan
    Li, Yuanyuan
    Xue, Lihong
    Yan, Youwei
    JOURNAL OF ALLOYS AND COMPOUNDS, 2010, 491 (1-2) : 264 - 267
  • [3] InGaN blue light-emitting diodes with ZnO nucleation layers prepared by the sol-gel method
    Chen, Lung-Chien
    Huang, Jeng-Bing
    Cheng, Pei-Jong
    Hong, Lu-Sheng
    SEMICONDUCTOR SCIENCE AND TECHNOLOGY, 2007, 22 (10) : 1178 - 1182
  • [4] Protective sol-gel coating on silicate phosphor used in light emitting diodes
    Kim, J. P.
    Song, S. B.
    APPLIED SURFACE SCIENCE, 2011, 257 (06) : 2159 - 2163
  • [5] CIGSS films prepared by sol-gel route
    Oliveira, L.
    Todorov, T.
    Chassaing, E.
    LinCot, D.
    Carda, J.
    Escribano, P.
    THIN SOLID FILMS, 2009, 517 (07) : 2272 - 2276
  • [6] Two-Layer Fuel Cell Electrolyte Structure by Sol-Gel Processing
    Karun Mehta
    Ren Xu
    Anil V. Virkar
    Journal of Sol-Gel Science and Technology, 1998, 11 : 203 - 207
  • [7] Two-layer fuel cell electrolyte structure by sol-gel processing
    Univ of Utah, Salt Lake City, United States
    J Sol Gel Sci Technol, 2 (203-207):
  • [8] Boehmite sol properties and preparation of two-layer alumina membrane by a sol-gel process
    Xia, CR
    Wu, F
    Meng, ZJ
    Li, FQ
    Peng, DK
    Meng, GY
    JOURNAL OF MEMBRANE SCIENCE, 1996, 116 (01) : 9 - 16
  • [9] Two-layer fuel cell electrolyte structure by sol-gel processing
    Mehta, K
    Xu, R
    Virkar, AV
    JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY, 1998, 11 (02) : 203 - 207
  • [10] Sol-gel derived barium orthovanadate phosphors for white light-emitting diodes
    Bharat, L. Krishna
    Nagaraju, Goli
    Hussain, Sk. Khaja
    Yu, Jae Su
    DYES AND PIGMENTS, 2018, 150 : 44 - 48