Flatness Measurement on a Coordinate Measuring Machine

被引：6
|
作者：
Zaimovic-Uzunovic, Nermina [1 ]
Lemes, Samir [1 ]
Tomasevic, Dzenana [1 ]
Kacmarcik, Josip [1 ]
机构：
[1] Univ Zenica, Fac Mech Engn, Fak Ska 1, Zenica 72000, Bosnia & Herceg
来源：
NEW TECHNOLOGIES, DEVELOPMENT AND APPLICATION II | 2020年 / 76卷
关键词：
Coordinate Measuring Machine (CMM); Flatness; Sampling; Measurement strategy; HARMONIC FITTING METHOD; GEOMETRY ESTIMATE ERROR; SELECTION;
D O I：
10.1007/978-3-030-18072-0_19
中图分类号：
TP301 [理论、方法];
学科分类号：
081202 ;
摘要：
Different aspects of surface measurement strategies on Coordinate Measuring Machine (CMM) were varied and their influence on the flatness deviation result was investigated. The CMM measurements were conducted using single point and continuous scanning probing. The measurements were performed with five different point densities in rectangular grid sampling strategies and three different probe styli. The results showed a very significant influence of a sampling size on a flatness deviation measurement result.
引用
收藏
页码：165 / 172
页数：8
相关论文
共 50 条
  • [1] On the selection of flatness measurement points in coordinate measuring machine inspection
    Kim, WS
    Raman, S
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2000, 40 (03): : 427 - 443
  • [2] Cylindricity Measurement on a Coordinate Measuring Machine
    Zaimovic-Uzunovic, Nermina
    Lemes, Samir
    ADVANCES IN MANUFACTURING (MANUFACTURING 2017), 2018, : 825 - 835
  • [3] COORDINATE MEASURING MACHINE MEASUREMENT UNCERTAINTY STUDY
    Tulcan, Aurel
    Cioana, Cristian
    Cosma, Cristian
    Grozav, Ion
    MODTECH 2011: NEW FACE OF T.M.C.R., VOL I AND II, 2011, : 1105 - 1108
  • [4] Selection of the coordinate measuring machine for the gear measurement
    Grzelka, M
    Szelewski, M
    MEASURE AND QUALITY CONTROL IN PRODUCTION, 2004, 1860 : 417 - 425
  • [5] Selection of sampling points for accurate evaluation of flatness error using coordinate measuring machine
    Raghunandan, R.
    Rao, P. Venkateswara
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2008, 202 (1-3) : 240 - 245
  • [6] Measurement of nonrigid freeform surfaces by coordinate measuring machine
    Ascione, Rocco
    Polini, Wilma
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2010, 51 (9-12): : 1055 - 1067
  • [7] Micro Coordinate Measuring Machine for Parallel Measurement of Microstructures
    Schrader, Christian
    Herbst, Christian
    Tutsch, Rainer
    Buettgenbach, Stephanus
    Krah, Thomas
    MEASUREMENT TECHNOLOGY AND INTELLIGENT INSTRUMENTS IX, 2010, 437 : 136 - +
  • [8] Measurement of nonrigid freeform surfaces by coordinate measuring machine
    Rocco Ascione
    Wilma Polini
    The International Journal of Advanced Manufacturing Technology, 2010, 51 : 1055 - 1067
  • [9] The measurement of optical and geometric parameters by a coordinate measuring machine
    Chang, Shenq-Tsong
    Lin, Wei-Cheng
    Huang, Ting-Ming
    Hsu, Ming-Yin
    Huang, Po-Hsuan
    Lin, Yu-Chuan
    MULTISPECTRAL, HYPERSPECTRAL, AND ULTRASPECTRAL REMOTE SENSING TECHNOLOGY, TECHNIQUES AND APPLICATIONS IV, 2012, 8527
  • [10] Selection of an optimum sample size for flatness error estimation while using coordinate measuring machine
    Raghunandan, R.
    Rao, P. Venkateswara
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2007, 47 (3-4): : 477 - 482
12345