Experimental study on high pre-cracked RC beams shear-strengthened with CFRP strips

被引:21
|
作者
Yu, Feng [1 ]
Guo, Shengquan [1 ]
Wang, Shilong [1 ]
Fang, Yuan [1 ]
机构
[1] Anhui Univ Technol, Dept Civil Engn & Architecture, Maanshan 243002, Peoples R China
关键词
CFRP; Concrete beams; Reinforcement; Shear capacity; Shear span ratio; Pre-cracked degree; REINFORCED-CONCRETE BEAMS; FRP; PERFORMANCE; CAPACITY; BEHAVIOR; CARBON; MODEL; SPAN;
D O I
10.1016/j.compstruct.2019.111163
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
Experimental studies on shear capacity of eighteen pre-cracked reinforced concrete (RC) beams shear-strengthened with carbon fiber reinforced polymer (CFRP) strips are carried out in this study. The effects of CFRP strips spacing, shear span ratio and pre-cracked degree on the failure mode, shear capacity, load-deflection curve and moment-curvature relationship of strengthened specimens are analyzed. Three failure modes related to the failure of CFRP strips, that is the bonding failure, the debond failure and the fracture failure of CFRP strips, are observed for specimens with different structural parameters. Moreover, with decrease of CFRP strips spacing, the shear capacity, the ultimate deflection and the bending stiffness of specimens increase. With increase of pre-cracked degree, the increment of shear capacity of RC beams shear-strengthened with CFRP strips is lower than that of non-cracked beams. The pre-cracked degree presents slight effect on the stiffness of CFRP strips-strengthened beams. Further, a revised model to determine the shear capacity of CFRP strips is proposed by accounting for the strain distribution of CFRP strips and the pre-cracked degree. Comparison between the experimental results and the calculated values indicates that the proposed formula can versatilely evaluate the shear capacity of CFRP strips strengthened RC beams.
引用
收藏
页数:14
相关论文
共 50 条
  • [1] Size effect in uncracked and pre-cracked reinforced concrete beams shear-strengthened with composite jackets
    Long Nguyen-Minh
    Rovnak, Marian
    [J]. COMPOSITES PART B-ENGINEERING, 2015, 78 : 361 - 376
  • [2] Experimental Study on T-section RC Beams Shear-strengthened with Prestressed NSM CFRP
    Peng, Hui
    Guo, Heng-Liang
    Zhong, Zheng-Qiang
    Su, Miao
    Chen, Hui
    Huang, Dun-Wen
    [J]. Zhongguo Gonglu Xuebao/China Journal of Highway and Transport, 2022, 35 (02): : 159 - 168
  • [3] T-section RC beams shear-strengthened with anchored CFRP U-strips
    Chen, G. M.
    Zhang, Z.
    Li, Y. L.
    Li, X. Q.
    Zhou, C. Y.
    [J]. COMPOSITE STRUCTURES, 2016, 144 : 57 - 79
  • [4] Experimental study on T-section RC beams shear-strengthened with prestressed CFRP sheets
    Zhou, Chang
    Wang, Wenwei
    Shi, Shaoyang
    [J]. Tumu Gongcheng Xuebao/China Civil Engineering Journal, 2020, 53 (09): : 68 - 76
  • [5] Experimental and numerical study of the RC beams shear-strengthened with NSM technique
    Mostofinejad, Davood
    Esfahani, Mohammad Reza
    Shomali, Amir
    [J]. JOURNAL OF COMPOSITE MATERIALS, 2019, 53 (17) : 2377 - 2389
  • [6] Analysis of RC beams strengthened by CFRP strips—Experimental and FEA study
    I. Jankowiak
    [J]. Archives of Civil and Mechanical Engineering, 2012, 12 : 376 - 388
  • [7] Experimental study of the steel/CFRP interaction in shear-strengthened RC beams incorporating macro-synthetic fibers
    Altoubat, Salah
    Karzad, Abdul Saboor
    Maalej, Mohamed
    Barakat, Samer
    Junaid, Talha
    [J]. STRUCTURES, 2020, 25 : 88 - 98
  • [8] Retrofitting Pre-cracked RC Beams Using CFRP and Epoxy Injections
    Hawileh, R.
    Tamimi, A.
    Abdalla, J. A.
    Wehbi, M. H.
    [J]. COMPOSITE SCIENCE AND TECHNOLOGY, PTS 1 AND 2, 2011, 471-472 : 692 - 696
  • [9] A modified model for ultimate bearing capacity of CFRP-shear-strengthened pre-cracked beams with geopolymer
    Liu, Jinliang
    Su, Xincheng
    [J]. MULTIDISCIPLINE MODELING IN MATERIALS AND STRUCTURES, 2022, 18 (05) : 919 - 939
  • [10] Process of debonding in RC beams shear-strengthened with FRP U-strips or side strips
    Chen, G. M.
    Teng, J. G.
    Chen, J. F.
    [J]. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2012, 49 (10) : 1266 - 1282