α Phase Forming on Surface Layer and Precipitating Inside of a Ti-Mo Based Alloy Annealed in Air

被引：2
|
作者：
Song, Jie [1 ]
Xie, Chaoying [1 ]
机构：
[1] Shanghai Jiao Tong Univ, Dept Mat Sci, Open Lab State Educ Commiss High Temp Mat & Tests, Shanghai 200030, Peoples R China
来源：
ADVANCED MATERIALS AND PROCESSING | 2007年 / 26-28卷
关键词：
Ti-Mo based alloy; Annealing; Oxidation; alpha-phase; Precipitation;
D O I：
10.4028/www.scientific.net/AMR.26-28.1295
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
alpha-phase forming on the surface layer and precipitation of alpha-phase inside a Ti-Mo alloy during annealing in air has been investigated thermodynamically. alpha-phase layer is increased rapidly when annealing temperature exceeds 700 degrees C. When the 850 degrees C solution-treated specimen annealed at 400 degrees C for 1 hour, there is no alpha-phase precipitates. As annealing temperature increased to 800 degrees C, the amount of alpha-phase precipitates first increased to a maximum at 600 degrees C, then decreased.
引用
收藏
页码：1295 / +
页数：5
相关论文
共 50 条
  • [1] Surface relief of α″ martensite in a Ti-Mo alloy
    H. Guo
    M. Enomoto
    K. Okuda
    Metallurgical and Materials Transactions A, 2000, 31 : 599 - 605
  • [2] Surface relief of α" martensite in a Ti-Mo alloy
    Guo, H
    Okuda, K
    Enomoto, M
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2000, 31 (03): : 599 - 605
  • [3] Surface reconstruction associated with α precipitation in a Ti-Mo alloy
    Guo, H
    Enomoto, M
    SCRIPTA MATERIALIA, 2006, 54 (07) : 1409 - 1413
  • [4] Surface relief effects of α precipitates in a Ti-Mo alloy
    Guo, H
    Enomoto, M
    ACTA MATERIALIA, 2002, 50 (05) : 929 - 941
  • [5] Surface reliefs of black plates in a Ti-Mo alloy
    Guo, H
    Enomoto, M
    Wang, JJ
    JAPAN INSTITUTE OF METALS, PROCEEDINGS, VOL 12, (JIMIC-3), PTS 1 AND 2: SOLID - SOLID PHASE TRANSFORMATIONS, 1999, : 1180 - 1183
  • [6] The phase, morphology and surface characterization of Ti-Mo alloy films prepared by magnetron sputtering
    Liu, Gang
    Yang, Yanqing
    Luo, Xian
    Huang, Bin
    Li, Pengtao
    RSC ADVANCES, 2017, 7 (83): : 52595 - 52603
  • [7] PHASE-TRANSFORMATIONS IN A TI-MO ALLOY ON CONTINUOUS HEATING AND COOLING
    BELYANIN, VA
    NOVIKOV, II
    PROSKURIN, VB
    RUSSIAN METALLURGY, 1981, (01): : 167 - 170
  • [8] β to ω phase transformation due to aging in a Ti-Mo alloy deformed in impact compression
    Sukedai, E
    Yoshimitsu, D
    Matsumoto, H
    Hashimoto, H
    Kiritani, M
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 350 (1-2): : 133 - 138
  • [9] Inverse tent-shaped surface relief of α plates in a Ti-Mo alloy
    Guo, H
    Yamamoto, A
    Enomoto, M
    SCRIPTA MATERIALIA, 2000, 43 (10) : 899 - 903
  • [10] INVESTIGATION OF THE MICROSTRUCTURE OF THE OMEGA PHASE IN TI-MO ALLOY BY USING HREM AND DARK FIELD METHODS
    SUKEDAI, E
    HASHIMOTO, H
    INSTITUTE OF PHYSICS CONFERENCE SERIES, 1990, (98): : 371 - 374
12345