Erosion Wear of Reactive Sintered WC-TiC-Co Cermets

被引：2

作者：

Tarraste, Marek ^{[1
]}

Juhani, Kristjan ^{[1
]}

Pirso, Jueri ^{[1
]}

Viljus, Mart ^{[2
]}

机构：

[1] Tallinn Univ Technol, Dept Mat Engn, Ehitajate Tee 5, EE-19086 Tallinn, Estonia

[2] Tallinn Univ Technol, Ctr Mat Res, Tallinn, Estonia

来源：

ENGINEERING MATERIALS & TRIBOLOGY XXII | 2014年 / 604卷

关键词：

tungsten carbide; cermets; reactive sintering; erosion wear; wear mechanism;

D O I：

10.4028/www.scientific.net/KEM.604.63

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

WC-5TiC-15Co cermets were prepared via novel technology - reactive sintering. In case of reactive sintering the elemental powders of tungsten, titanium, cobalt and carbon black are activated through ball-milling and then the synthesis of carbide occurs in the same cycle with the sintering of the cermet. Carbon content in initial powder mixture has crucial effect on properties of reactive sintered WC-based cermets. This paper investigates the erosion wear of the WC-5TiC-15Co cermets. Wear resistance dependent on the carbon content as well as wear mechanism of reactive sintered and conventional cermets are exhibited.

引用

页码：63 / +

页数：2

共 50 条

[1] SLURRY EROSION WEAR OF TiC-NiMo AND WC-Co CERMETS
Juhani, K.
Pirso, J.
Viljus, M.
PROCEEDINGS OF THE 7TH INTERNATIONAL CONFERENCE OF DAAAM BALTIC INDUSTRIAL ENGINEERING, VOLS 1 AND 2, 2010, : 456 - +
[2] Microstructure and wear properties of WC-TiC-Co/CuZnNi composite surface coating
Wang, XH
Zou, ZD
Zhang, M
Qu, SY
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2006, 172 (02) : 188 - 194
[3] Microstructural characteristics and wear-resistant mechanisms of WC-TiC-co coatings with varying TiC contents
Wang, Chen
Wang, Haibin
Zhao, Zhi
Liu, Chao
Lu, Hao
Liu, Xuemei
Song, Xiaoyan
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2024, 122
[4] Abrasive impact wear of WC-Co and TiC-NiMo cermets
Juhani, K.
Pirso, J.
Viljus, M.
Letunovits, S.
Tarraste, M.
PROCEEDINGS OF THE 8TH INTERNATIONAL CONFERENCE OF DAAAM BALTIC INDUSTRIAL ENGINEERING, VOLS 1 AND 2, 2012, : 621 - 626
[5] Enhancing wear performance by depositing alumina/GNPs coating on textured WC-TiC-Co substrates
Liu, Changxia
Sun, Junlong
Venturi, Federico
Romero, Acacio Rincon
Hussain, Tanvir
SURFACE & COATINGS TECHNOLOGY, 2022, 447
[6] PHASE ANALYSIS OF WC-TIC-CO SOLID ALLOYS
TUMANOV, VI
TRUKHANO.ZS
FUNKE, VF
BYSTROVA, KA
INDUSTRIAL LABORATORY, 1965, 31 (06): : 795 - &
[7] PROPERTIES AND MICROSTRUCTURE OF WC-TIC-CO AND WC-TIC-MO2C-CO(NI) CEMENTED CARBIDES
BHAUMIK, SK
UPADHYAYA, GS
VAIDYA, ML
MATERIALS SCIENCE AND TECHNOLOGY, 1991, 7 (08) : 723 - 727
[8] EFFECTS OF CARBON CONTENT ON PROPERTIES OF WC-TIC-CO ALLOYS
SUZUKI, H
HAYASHI, K
TRANSACTIONS OF THE JAPAN INSTITUTE OF METALS, 1966, 7 (03): : 199 - &
[9] Chlorination of components of the WC-Co, WC-TiC-Co, and TiC-Mo-Ni hard alloys under electroerosion
Satyvaldiev, AS
Asanov, UA
Dronov, EO
RUSSIAN JOURNAL OF APPLIED CHEMISTRY, 1996, 69 (03) : 460 - 461
[10] MAKING OF HARD ALLOY WC-TiC-Co AND STUDY OF ITS CHARACTER
张思玉
梁冰青
郑克全
Chinese Science Bulletin, 1992, (11) : 899 - 904

← 1 2 3 4 5 →