Use of Ash and Slag Waste from Thermal Power Plants for the Production of Rare Earth Compounds and Ceramic Membranes

被引:0
|
作者
Shapkin, N. P. [1 ]
Shkuratov, A. L. [1 ]
Taskin, A. V. [1 ]
Khal'chenko, I. G. [1 ]
Maslova, N. V. [1 ]
Fedorets, A. N. [1 ]
机构
[1] Far Eastern Fed Univ, Vladivostok 690922, Russia
关键词
bottom ash; ash and slag processing; rare earth elements; silicon oxide; fusion with alkali; COAL FLY-ASH; ELEMENTS; ALUMINA; EXTRACTION; ADDITIVES; RECOVERY;
D O I
10.1134/S1070427222090154
中图分类号
O69 [应用化学];
学科分类号
081704 ;
摘要
The processing of ash/slag wastes were studied, while a complete analysis of the bottom ash of the Luchegorsk thermal power plant in the Primorsky Territory was carried out, and a study was performed on the separation of rare earth elements by various methods. The ash was previously cleaned from unburned coal (underburnt) and iron oxides, the resulting product was processed with various methods. Isolation and separation of products was carried out in several stages. The acidity of the medium was determined, which corresponds to the quantitative precipitation of iron and aluminum matrix ions depending on the initial concentrations of the solutions. Silicon oxide of 97% purity with a high specific surface area was obtained, as well as a solid product with a content of rare earth elements more than 100 times higher than in the original ash samples. The content of rare earth elements in the final product is 74.5% of the content of these elements in the original material, and the product is also enriched with other trace elements such as zirconium, hafnium, and tungsten. When the ash is processed, solid waste remains, which can be further utilized to fabricate ceramic materials and membranes with high technical performance.
引用
收藏
页码:1394 / 1403
页数:10
相关论文
共 50 条
  • [1] Use of Ash and Slag Waste from Thermal Power Plants for the Production of Rare Earth Compounds and Ceramic Membranes
    N. P. Shapkin
    A. L. Shkuratov
    A. V. Taskin
    I. G. Khal’chenko
    N. V. Maslova
    A. N. Fedorets
    Russian Journal of Applied Chemistry, 2022, 95 : 1394 - 1403
  • [2] Analyzing the Technology of Using Ash and Slag Waste from Thermal Power Plants in the Production of Building Ceramics
    Malchik, A. G.
    Litovkin, S. V.
    Rodionov, P. V.
    Kozik, V. V.
    Gaydamak, M. A.
    INTERNATIONAL SCIENTIFIC AND PRACTICAL CONFERENCE ON URGENT PROBLEMS OF MODERN MECHANICAL ENGINEERING, 2016, 127
  • [3] Recycling Ash and Slag Waste from Thermal Power Plants to Produce Foamed Geopolymers
    Yatsenko, Elena A.
    Goltsman, Boris M.
    Izvarin, Andrey I.
    Kurdashov, Viktor M.
    Smoliy, Victoria A.
    Ryabova, Anna V.
    Klimova, Lyudmila V.
    ENERGIES, 2023, 16 (22)
  • [4] ASH AND SLAG WASTE OF THERMAL POWER PLANTS AS A PROMISING RAW MATERIAL OF THE PRESENT
    Khlopytskyi, Oleksii O.
    Kovalenko, Ihor L.
    Frolova, Liliya A.
    Skiba, Marharyta I.
    JOURNAL OF CHEMISTRY AND TECHNOLOGIES, 2023, 31 (03): : 635 - 641
  • [5] Methods for Beneficiation of Ash and Slag Waste from Coal-Fired Thermal Power Plants and Ways for Their Commercial Use (a Review)
    Yu. V. Ryabov
    L. M. Delitsyn
    N. N. Ezhova
    S. V. Sudareva
    Thermal Engineering, 2019, 66 : 149 - 168
  • [6] Methods for Beneficiation of Ash and Slag Waste from Coal-Fired Thermal Power Plants and Ways for Their Commercial Use (a Review)
    Ryabov, Yu, V
    Delitsyn, L. M.
    Ezhova, N. N.
    Sudareva, S., V
    THERMAL ENGINEERING, 2019, 66 (03) : 149 - 168
  • [7] Optimization of the Complex Recycling of Ash and Slag from Thermal Power Plants
    Krasnenko, T. I.
    Bamburov, V. G.
    THEORETICAL FOUNDATIONS OF CHEMICAL ENGINEERING, 2011, 45 (05) : 791 - 793
  • [8] PRODUCTION OF POROUS GEOPOLYMERS USING ASH AND SLAG WASTE OF POWER PLANTS IN THE RUSSIAN ARCTIC
    Yatsenko, E. A.
    Goltsman, B. M.
    V. Sergeev, V.
    EURASIAN MINING, 2022, (02): : 58 - 60
  • [9] Optimization of the complex recycling of ash and slag from thermal power plants
    T. I. Krasnenko
    V. G. Bamburov
    Theoretical Foundations of Chemical Engineering, 2011, 45 : 791 - 793