A numerical simulation of the resin film infusion process

被引：33
|
作者：
Park, J
Kang, MK
机构：
[1] Sejong Univ, Sch Mech & Aerosp Engn, Kwangjin Ku, Seoul 143747, South Korea
[2] Seoul Natl Univ, Sch Elect Engn & Comp Sci, Kwanak Ku, Seoul 151742, South Korea
来源：
COMPOSITE STRUCTURES | 2003年 / 60卷 / 04期
关键词：
resin film infusion; thermosetting resin film; maximum infusion height;
D O I：
10.1016/S0263-8223(03)00021-7
中图分类号：
O3 [力学];
学科分类号：
08 ; 0801 ;
摘要：
A numerical analysis was conducted for the resin film infusion (RFI) process using semi-cured thermosetting resin films. Mathematical models were developed for the compression of fiber and the viscosity of resin. The force balance between the fiber preform and the resin was considered to account for the deformation of fiber preform and the swell of fiber during the infusion. In an effort to locate the optimal process conditions such as the mold temperature, the fiber volume fraction, and the infusion pressure, a parametric study was carried out for the progression of resin and the infusion time for different process conditions. The numerical code developed in this study was found to be useful in determining the maximum height of vertical sections that can be infused by squeezing the liquefied resin film from the base panel. (C) 2003 Elsevier Science Ltd. All rights reserved.
引用
收藏
页码：431 / 437
页数：7
相关论文
共 50 条
  • [1] Simulation and analysis of model filling of resin film infusion process
    Yan, Shi-Lin
    Yang, Mei
    Tan, Hua
    [J]. Cailiao Kexue yu Gongyi/Material Science and Technology, 2007, 15 (01): : 11 - 14
  • [2] Numerical Modeling of Resin Film Infusion Process with Compaction and Its Application
    Li, Duning
    Nie, Yufeng
    Zhou, Xuemei
    Cai, Li
    [J]. CMES-COMPUTER MODELING IN ENGINEERING & SCIENCES, 2011, 72 (02): : 149 - 166
  • [3] Simulation of the resin film infusion process based on the finite element method
    Yang M.
    Yan S.
    Tan H.
    [J]. Journal Wuhan University of Technology, Materials Science Edition, 2006, 21 (04): : 180 - 182
  • [4] Simulation of the Resin Film Infusion Process Based on the Finite Element Method
    杨梅
    晏石林
    [J]. Journal of Wuhan University of Technology(Materials Science), 2006, (04) : 180 - 182
  • [5] Simulation of the resin film infusion process based on the finite element method
    Yang Mei
    Yan Shilin
    Tan Hua
    [J]. JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 2006, 21 (04): : 180 - 182
  • [6] Resin flow monitoring in resin film infusion process
    Antonucci, V
    Giordano, M
    Nicolais, L
    Calabrò, A
    Cusano, A
    Cutolo, A
    Inserra, S
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2003, 143 : 687 - 692
  • [7] Industrial simulation of resin infusion process
    Simulation industrielle des procédés d'infusion de résine
    [J]. 1600, Lavoisier (24): : 39 - 52
  • [8] A three-dimensional simulation model of the resin film infusion manufacturing process
    Caba, AC
    Loos, AC
    Rattazzi, D
    Batra, RC
    [J]. MATERIALS-THE STAR AT CENTER STAGE, 1998, 30 : 329 - 340
  • [9] Three-dimensional numerical simulation of the filling stage in resin infusion process
    Yang, Bo
    Tang, Qian
    Wang, Shilong
    Jin, Tianguo
    Bi, Fengyang
    [J]. JOURNAL OF COMPOSITE MATERIALS, 2016, 50 (29) : 4171 - 4186
  • [10] Process simulation model for the manufacture of a blade-stiffened panel by the resin film infusion process
    Dept. of Eng. Science and Mechanics, Virginia Polytechnic Institute, State University, Blacksburg, VA 24061, United States
    [J]. Compos Sci Technol, 3 (273-289):
12345