The study of the elemental composition in the surface layers of the cutting tool with composite nanostructured coating

被引：1
|
作者：
Schipachev, Andrey [1 ]
Mukhamadeev, Ilshat [2 ]
Mukhamadeev, Vener [2 ]
机构：
[1] St Petersburg Min Univ, 2,21st Line, St Petersburg 199106, Russia
[2] Ufa State Aviat Tech Univ, Ul K Marxa 12, Ufa 450008, Republic Of Bas, Russia
来源：
MATERIALS TODAY-PROCEEDINGS | 2019年 / 19卷
关键词：
Coating; Wear-resistance; Titanium; Aluminum; Self-organization; Friction;
D O I：
10.1016/j.matpr.2019.08.043
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this paper, an analysis of elemental composition in surface layers of a cutting tool with a composite coating in the initial state and after annealing under pressure was carried out in order to observe the changes occurring in the test samples and determine the diffusion and structural phenomena. A decrease in the composition of tungsten in the substrate, related to the introduction of coating constituents in the surface layers of the tool was discovered. (C) 2019 Elsevier Ltd. All rights reserved.
引用
收藏
页码：2401 / 2404
页数：4
相关论文
共 50 条
  • [1] Study of the Influence Tool Surface Coating on Cutting Process
    孟祥凤
    装备制造技术, 2008, (10) : 18 - 19
  • [2] Composition of the Hardened Surface of a Carbide Cutting Tool
    Plotnikov S.A.
    Cheremisinov P.N.
    Kluonis A.S.
    Kozlov E.V.
    Russian Engineering Research, 2024, 44 (4) : 534 - 536
  • [3] CVD COATING OF CERAMIC LAYERS ON CERAMIC CUTTING-TOOL MATERIALS
    PORAT, R
    JOURNAL DE PHYSIQUE IV, 1991, 1 (C2): : 549 - 556
  • [4] Nanostructured surface coating layer of calcium carbonate composite particles
    Fan, SM
    Gai, GS
    Yang, YF
    Fu, SY
    Miao, HZ
    HIGH-PERFORMANCE CERAMICS III, PTS 1 AND 2, 2005, 280-283 : 593 - 596
  • [5] Change in the Chemical Composition of a Carbide Tool with TI–Al–N Coating Surface Layers During Machining
    K. N. Ramazanov
    E. L. Vardanyan
    V. R. Mukhamadeev
    I. R. Mukhamadeev
    A. A. Maslov
    Journal of Surface Investigation: X-ray, Synchrotron and Neutron Techniques, 2022, 16 : 412 - 415
  • [6] Study of a Nanostructured Anatase Coating on the Rutile Surface
    Porozova, S. E.
    Gurov, A. A.
    Kamenschikov, O. Yu.
    Shuliatnikova, O. A.
    Rogozhnikov, G. I.
    RUSSIAN JOURNAL OF NON-FERROUS METALS, 2019, 60 (02) : 194 - 199
  • [7] Study of a Nanostructured Anatase Coating on the Rutile Surface
    S. E. Porozova
    A. A. Gurov
    O. Yu. Kamenschikov
    O. A. Shuliatnikova
    G. I. Rogozhnikov
    Russian Journal of Non-Ferrous Metals, 2019, 60 : 194 - 199
  • [8] NbC coating layers on the tool steel surface and its properties
    Liu, Zhi-Guo
    Zhao, Jin-Long
    Hizhnjak, V.G.
    Jinshu Rechuli/Heat Treatment of Metals, 2002, 27 (12):
  • [9] Change in the Chemical Composition of a Carbide Tool with TI-Al-N Coating Surface Layers During Machining
    Ramazanov, K. N.
    Vardanyan, E. L.
    Mukhamadeev, V. R.
    Mukhamadeev, I. R.
    Maslov, A. A.
    JOURNAL OF SURFACE INVESTIGATION, 2022, 16 (03): : 412 - 415
  • [10] Influence of the bilayer thickness of nanostructured multilayer MoN/CrN coating on its microstructure, hardness, and elemental composition
    A. D. Pogrebnyak
    O. V. Bondar
    B. Zhollybekov
    S. Konstantinov
    P. Konarski
    V. M. Beresnev
    A. I. Kupchishin
    Physics of the Solid State, 2017, 59 : 1798 - 1802
12345