Some issues on core-annulus and cluster models of circulating fluidized bed reactors

被引:0
|
作者
Bi, HT [1 ]
机构
[1] Univ British Columbia, Dept Biol & Chem Engn, Fluidizat Res Ctr, Vancouver, BC V6T 1Z4, Canada
来源
关键词
gas-solid suspensions; circulating fluidized beds; wall layer thickness;
D O I
暂无
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
The one-dimensional cluster model and the ore-annulus model are examined based n existing correlations. The core-annulus model is found to give reasonable agreement with ozone decomposition, data when the effective interphase mass transfer rate constant is equal to about 0.1 1/s, which is one order smaller than the reported values based on gas tracer tests. The prediction from the core-annulus model that the reactor performance decreases with increasing, the riser diameter is found to be inconsistent with limited experimental data The one-dimensional cluster model predicts that a riser reactor performs very close to the pseudo-homogeneous plug flow reactor because of the high mass transfer rate between the clustler and the dilute phase. The improvement of model predictions lies in the better characterization of the cluster shape size and the mass transfer rate between the cluster and the dilute phases.
引用
收藏
页码:809 / 817
页数:9
相关论文
共 50 条
  • [1] Visualization study on the interface of core-annulus flow in a circulating fluidized bed riser by PIV
    Shi, Huixian
    Wang, Qinhui
    Xu, Lihong
    Luo, Zhongyang
    Cen, Kefa
    [J]. CHALLENGES OF POWER ENGINEERING AND ENVIRONMENT, VOLS 1 AND 2, 2007, : 661 - +
  • [2] EXPERIMENTAL-STUDY ON THE INTERFACE OF CORE-ANNULUS FLOW IN THE RISER OF A CIRCULATING FLUIDIZED-BED
    YANG, HP
    GAUTAM, M
    [J]. POWDER TECHNOLOGY, 1995, 85 (01) : 57 - 64
  • [3] Steady-state simulation of core-annulus flow in a circulating fluidized bed (CFB) riser
    Gao, Xi
    Wang, Li-Jun
    Wu, Cheng
    Cheng, You-Wei
    Li, Xi
    [J]. CHEMICAL ENGINEERING SCIENCE, 2012, 78 : 98 - 110
  • [4] A core-annulus model for the radial flow structure in a liquid-solid circulating fluidized bed (LSCFB)
    Liang, WG
    Zhu, JX
    [J]. CHEMICAL ENGINEERING JOURNAL, 1997, 68 (01): : 51 - 62
  • [5] CATALYTIC CRACKING IN RISER REACTORS - CORE-ANNULUS AND ELBOW EFFECTS
    MARTIN, MP
    DEROUIN, C
    TURLIER, P
    FORISSIER, M
    WILD, G
    BERNARD, JR
    [J]. CHEMICAL ENGINEERING SCIENCE, 1992, 47 (9-11) : 2319 - 2324
  • [6] Reactors with circulating fluidized bed
    Hartman, M
    Svoboda, K
    Trnka, O
    Beran, Z
    [J]. CHEMICKE LISTY, 1999, 93 (12): : 788 - +
  • [7] Prediction of Core-Annulus Solids Mass Transfer Coefficient in Gas-Solid Fluidized Bed Risers
    刘新华
    高士秋
    宋文立
    [J]. Chinese Journal of Chemical Engineering, 2005, (05) : 7 - 12
  • [8] Prediction of core-annulus solids mass transfer coefficient in gas-solid fluidized bed risers
    Liu, XH
    Gao, SQ
    Song, WL
    [J]. CHINESE JOURNAL OF CHEMICAL ENGINEERING, 2005, 13 (05) : 577 - 582
  • [9] Modeling on core-annulus-wall structure in circulating fluidized bed riser
    Zhu, C
    Yu, Q
    Fan, LS
    [J]. Circulating Fluidized Bed Technology VIII, 2005, : 354 - 361
  • [10] Circulating fluidized-bed reactors
    Kunii, D
    Levenspiel, O
    [J]. CHEMICAL ENGINEERING SCIENCE, 1997, 52 (15) : 2471 - 2482