Sustainable machining: selection of optimum turning conditions based on minimum energy considerations

被引：305

作者：

Rajemi, M. F. ^{[1
]}

Mativenga, P. T. ^{[1
]}

Aramcharoen, A. ^{[1
]}

机构：

[1] Univ Manchester, Sch Mech Aerosp & Civil Engn, Manchester M60 1QD, Lancs, England

来源：

JOURNAL OF CLEANER PRODUCTION | 2010年 / 18卷 / 10-11期

基金：

英国工程与自然科学研究理事会;

关键词：

Sustainable; Machining; Turning; Energy; Optimisation; WEAR;

D O I：

10.1016/j.jclepro.2010.01.025

中图分类号：

X [环境科学、安全科学];

学科分类号：

08 ; 0830 ;

摘要：

The aim of the work reported in this paper was to develop a new model and methodology for optimising the energy footprint for a machined product. The total energy of machining a component by the turning process was modelled and optimised to derive an economic tool-life that satisfies the minimum energy footprint requirement. The work clearly identifies critical parameters in minimising energy use and hence reducing the energy cost and environmental footprint. Additionally, the paper explores and discusses the conflict and synergy between economical and environmental considerations as well as the effect of system boundaries in determining optimum machining conditions. (C) 2010 Elsevier Ltd. All rights reserved.

引用

页码：1059 / 1065

页数：7

共 50 条

[1] Extended model for selection of optimum turning conditions based on minimum energy considerations
Alswat, Haitham M.
Mativenga, Paul T.
[J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2023, 237 (13) : 2033 - 2046
[2] Energy centric selection of machining conditions for minimum cost
Balogun, Vincent Aizebeoje
Edem, Isuamfon F.
Gu, Heng
Mativenga, Paul Tarisai
[J]. ENERGY, 2018, 164 : 655 - 663
[3] Selection of optimum turning parameters based on cooperative optimization of minimum energy consumption and high surface quality
Xie, Nan
Zhou, Junfeng
Zheng, Beirong
[J]. 51ST CIRP CONFERENCE ON MANUFACTURING SYSTEMS, 2018, 72 : 1469 - 1474
[4] OPTIMUM TOOL GEOMETRY AND MACHINING CONDITIONS FOR TURNING TITANIUM ALLOY
ZYKIN, AS
[J]. RUSSIAN ENGINEERING JOURNAL-USSR, 1968, 48 (11): : 70 - &
[5] Selection of machining conditions for microchannels in ultraprecision diamond turning
Thanh-Hung Duong
Kim, Hyun-Chul
Lee, Dong-Yoon
[J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2013, 227 (10) : 1558 - 1570
[6] COMPUTER-AIDED SELECTION OF OPTIMUM MACHINING PARAMETERS IN MULTIPASS TURNING
MESQUITA, R
KRASTEVA, E
DOYTCHINOV, S
[J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 1995, 10 (01): : 19 - 26
[7] Calculation of optimum cutting conditions for turning operations using a machining theory
Meng, Q
Arsecularatne, JA
Mathew, P
[J]. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2000, 40 (12): : 1709 - 1733
[8] Optimum selection of machining conditions in abrasive flow machining using neural network
Jain, RK
Jain, VK
[J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2000, 108 (01) : 62 - 67
[9] Sustainable Optimization of Dry Turning of Stainless Steel based on Energy Consumption and Machining Cost
Bagaber, Salem Abdullah
Yusoff, Ahmad Razlan
[J]. 8TH CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING (HPC 2018), 2018, 77 : 397 - 400
[10] SELECTION OF PROCESS VARIABLES FOR OPTIMUM CONDITIONS IN MULTITOOL MACHINING OPERATIONS
FENTON, RG
XU, J
[J]. CURRENT ADVANCES IN MECHANICAL DESIGN & PRODUCTION IV, 1989, : 537 - 544

← 1 2 3 4 5 →